35 citations · 85 across the 3 of their papers we have counts for
6 papers
Effect of Substrate Roughness on Oxidation Resistance of an Aluminized Ni-Base Superalloy
Wojciech J. Nowak, Kamil Ocha, Patrycja Wierzba +2
In the present work, it is shown that the surface preparation method used on two Ni-based superalloys prior to aluminizing chemical vapor deposition (CVD) is one of the most import…
Effect of surface mechanical treatment on the oxidation behavior of FeAl-model alloy
Wojciech J. Nowak, Daria Serafin, Bartek Wierzba
Fe based alloys are commonly used in almost every sector of human life. For different reasons, the surfaces of the real parts are prepared using different methods, e.g., mirror-lik…
Effect of Surface Treatment on High-Temperature Oxidation Behavior of IN 713C
Wojciech J. Nowak, Bartek Wierzba
The effects of surface preparations on oxidation kinetics and oxide scale morphology for the commercially available Ni-based superalloy IN 713C have been investigated. The ground a…
The effect of surface preparation on high temperature oxidation of Ni, Cu and Ni-Cu alloy
Daria Serafin, Wojciech J. Nowak, Bartek Wierzba
In the present paper, the analysis of polishing, grinding and sand-blasting processes on oxidation behavior of nickel, copper and nickel-copper alloy has been investigated. Surface…
Mechanically prepared copper surface in oxidizing and non-oxidizing conditions
Daria Serafin, Wojciech J. Nowak, Bartek Wierzba
In the present work surface roughness of copper samples after mechanical surface preparation processes (polishing, grinding, sand-blasting) and after exposure in non-oxidizing (hig…
The calculation of the diffusion coefficients in ternary multiphase Ti-NiAl system
Daria Serafin, Wojciech J. Nowak, Bartek Wierzba
In this paper the problem of determination of the diffusion coefficients in a ternary multiphase system is discussed. In the literature there is a lack of data concerning the appro…