42 citations · 75 across the 9 of their papers we have counts for
9 papers
Effect of Self-Lubricating Carbon Materials on the Tribological Performance of Ultra-High-Molecular-Weight Polyethylene
N. Camacho, J. D. Escobedo-Rodríguez, J. M. Alvarado-Orozco +1
Ultra-high-molecular-weight polyethylene (UHMWPE) has been the gold standard for total knee replacements. Due to the knee's natural movements, UHMWPE wear debris production is inev…
Effect of pre-oxidation treatments on the structural, microstructural, and chemical properties of (Ni,Pt)Al systems
J. E. Garcia-Herrera, D. G. Espinosa-Arbelaez, L. A. Caceres-Diaz +5
The effect of isothermal pre-oxidation treatments on the \b{eta}-(Ni,Pt)Al + René N5 system degradation is here reported. The oxidation treatments were carried out from 900 (mostly…
Effect of Graded Bias Voltage on the Microstructure of arc-PVD CrN Films and its Response in Electrochemical & Mechanical Behavior
M. L. Cedeño-Venté, D. G. Espinosa-Arbeláez, J. Manríquez-Rocha +4
The effect of graded or constant bias voltages (-40 V, -80 V and -40/60/80 V) on size grain and surface defects of arc PVD deposited CrN films was investigated. Corrosion resistanc…
Plasma-assisted nitriding of M2 tool steel: An experimental and theoretical approach
J. M. Gonzalez-Carmona, G. C. Mondragon-Rodriguez, J. E. Galvan-Chaire +4
Present work was aimed to investigate the effect of nitriding time; 1, 1.5, 2.5 & 3.5 h, on surface characteristics & mechanical properties (surface nano-hardness, hardness Vickers…
Influence of HVOF parameters on HAp coating generation: An integrated approach using process maps
J. A. Hermann-Muñoz, J. A. Rincón-López, G. A. Clavijo-Mejía +4
An experimental approach based on design of experiments, process maps and the analysis of deposition first stages to improve the biocompatibility of High-Velocity Oxygen Fuel (HVOF…
Theoretical-Experimental failure analysis of the c-Al0.66Ti0.33N-M2 steel system using nanoindentation instrumented and finite element analysis
A. E. Gómez-Ovalle, M. Torres, J. M. Alvarado-Orozco +6
A theoretical-experimental methodology for failure analysis of the c-Al0.66Ti0.33N / Interface / M2 steel coating system is proposed here. This c-Al0.66Ti0.33N coating was deposite…
Phase stability and elastic properties in the system from first principles
Erik Gutiérrez-Valladares, Rurick Santos-Fragoso, Guillermo Vázquez-Tovar +5
Multicomponent nitrides are a hot research topic in the search of hard coatings. The effect of substitutions on the phase stabilities, magnetic, and elastic properties of $Al_{1-x-…
Diamond-Like Carbon Coatings on Plasma Nitrided M2 Steel: effect of deposition parameters on adhesion properties
A. Moreno-Barcenas, J. M Alvarado-Orozco, J. M. Gonzalez Carmona +3
Diamond-like carbon (DLC) coatings have excellent mechanical and tribological properties, as well as good wear and corrosion resistance. They are well established in medical, metal…
Effect of thermal treatments in high purity Ar on the oxidation behavior of arc-PVD c-Al0.66Ti0.33N coatings
G. C. Mondragon Rodriguez, Y. Chipatecua-Godoy, N. Camacho +3
The effect of temperature in high purity Ar (low oxygen partial pressure) on the oxidation and crystal phase evolution of c-Al0.66Ti0.33N arc-PVD coatings was investigated. High te…