activity
19992025
most citedSearch for Single Top Production at LEP

88 citations · 527 across the 40 of their papers we have counts for

collaborators
Showing physics.ins-detShow all

15 papers · 1 filter

physics.ins-det2025

Performance of the front-end electronics of the CMS electromagnetic calorimeter barrel for the High-Luminosity LHC

The CMS Electromagnetic Calorimeter Group

The performance of the CMS electromagnetic calorimeter upgraded readout electronics, developed for the High-Luminosity phase of the LHC, is discussed. Data collected in two beam te…

physics.ins-det2025★ 9 cited

The CMS Barrel Timing Layer: test beam confirmation of module timing performance

F. Addesa, P. Akrap, A. Albert +127

First of its kind, the barrel section of the MIP Timing Detector is a large area timing detector based on LYSO:Ce crystals and SiPMs which are required to operate in an unprecedent…

physics.ins-det2024

Optimization of LYSO crystals and SiPM parameters for the CMS MIP timing detector

F. Addesa, T. Anderson, P. Barria +68

For the High-Luminosity (HL-LHC) phase, the upgrade of the Compact Muon Solenoid (CMS) experiment at CERN will include a novel MIP Timing Detector (MTD). The central part of MTD, t…

physics.ins-det2023★ 23 cited

Autoencoder-based Anomaly Detection System for Online Data Quality Monitoring of the CMS Electromagnetic Calorimeter

The CMS ECAL Collaboration

The CMS detector is a general-purpose apparatus that detects high-energy collisions produced at the LHC. Online Data Quality Monitoring of the CMS electromagnetic calorimeter is a…

physics.ins-det2022★ 25 cited

Comparative characterization study of LYSO:Ce crystals for timing applications

F. M. Addesa, P. Barria, R. Bianco +28

Cerium-doped Lutetium-Yttrium Oxyorthosilicate (LYSO:Ce)is one of the most widely used Cerium-doped Lutetium based scintillation crystals. Initially developed for medical detectors…

physics.ins-det2022★ 7 cited

Commissioning of the PADME experiment with a positron beam

P. Albicocco, R. Assiro, F. Bossi +53

The PADME experiment is designed to search for a hypothetical dark photon produced in positron-electron annihilation using a bunched positron beam at the Beam Test Fac…

physics.ins-det2021★ 14 cited

Test beam characterization of sensor prototypes for the CMS Barrel MIP Timing Detector

R. Abbott, A. Abreu, F. Addesa +196

The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event re…

physics.ins-det2020★ 10 cited

Characterisation and performance of the PADME electromagnetic calorimeter

P. Albicocco, J. Alexander, F. Bossi +42

The PADME experiment at the LNF Beam Test Facility searches for dark photons produced in the annihilation of positrons with the electrons of a fix target. The strategy is to look f…

physics.ins-det2018★ 20 cited

Characterization and Performance of PADME's Cherenkov-Based Small-Angle Calorimeter

A. Frankenthal, J. Alexander, B. Buonomo +22

The PADME experiment, at the Laboratori Nazionali di Frascati (LNF), in Italy, will search for invisible decays of the hypothetical dark photon via the process $e^+e^-\rightarrow γ…

physics.ins-det2017★ 8 cited

Response of microchannel plates in ionization mode to single particles and electromagnetic showers

A. Yu. Barnyakov, M. Yu. Barnyakov, L. Brianza +22

Hundreds of concurrent collisions per bunch crossing are expected at future hadron colliders. Precision timing calorimetry has been advocated as a way to mitigate the pileup effect…

physics.ins-det2016★ 20 cited

Performance of the PADME calorimeter prototype at the DANE BTF

M. Raggi, V. Kozhuharov, P. Valente +10

The PADME experiment at the DANE Beam-Test Facility (BTF) aims at searching for invisible decays of the dark photon by measuring the final state missing mass in the process $e^+…

physics.ins-det2015★ 3 cited

Performance of a Tungsten-Cerium Fluoride Sampling Calorimeter in High-Energy Electron Beam Tests

R. Becker, L. Bianchini, G. Dissertori +29

A prototype for a sampling calorimeter made out of cerium fluoride crystals interleaved with tungsten plates, and read out by wavelength-shifting fibres, has been exposed to beams…

physics.ins-det2015★ 30 cited

Response of microchannel plates to single particles and to electromagnetic showers

L. Brianza, F. Cavallari, D. Del Re +22

We report on the response of microchannel plates (MCPs) to single relativistic particles and to electromagnetic showers. Particle detection by means of secondary emission of electr…

physics.ins-det2013★ 2 cited

IRIDE White Book, An Interdisciplinary Research Infrastructure based on Dual Electron linacs&lasers

D. Alesini, M. Alessandroni, M. P. Anania +211

This report describes the scientific aims and potentials as well as the preliminary technical design of IRIDE, an innovative tool for multi-disciplinary investigations in a wide fi…

physics.ins-det2009★ 21 cited

Radiation hardness qualification of PbWO4 scintillation crystals for the CMS Electromagnetic Calorimeter

The CMS Electromagnetic Calorimeter Group, P. Adzic, N. Almeida +267

Ensuring the radiation hardness of PbWO4 crystals was one of the main priorities during the construction of the electromagnetic calorimeter of the CMS experiment at CERN. The produ…