40 citations · 102 across the 6 of their papers we have counts for
7 papers
Measurement of the Per Cavity Energy Recovery Efficiency in the Single Turn CBETA Configuration
C. Gulliford, N. Banerjee, A. Bartnik +9
Prior to establishing operation of the world's first mulit-turn superconducting Energy Recovery Linac, (ERL) the Cornell-BNL Energy Recovery Test Accelerator (CBETA) was configured…
Active Suppression of Microphonics Detuning in high Cavities
Nilanjan Banerjee, Georg Hoffstaetter, Matthias Liepe +2
Operation of Superconducting Radio Frequency (SRF) cavities with high loaded quality factors is becoming increasingly preferred for applications which involve low beam loading incl…
Beam Commissioning Results from the CBETA Fractional Arc Test
C. Gulliford, N. Banerjee, A. Bartnik +18
This work describes first commissioning results from the Cornell Brookhaven Energy Recovery Test Accelerator Fractional Arc Test. These include the recommissioning of the Cornell p…
CBETA Design Report, Cornell-BNL ERL Test Accelerator
G. H. Hoffstaetter, D. Trbojevic, C. Mayes +51
This design report describes the construction plans for the world's first multi-pass SRF ERL. It is a 4-pass recirculating linac that recovers the beam's energy by 4 additional, de…
Nitrogen-Doped 9-Cell Cavity Performance in a Test Cryomodule for LCLS-II
Dan Gonnella, Ralf Eichhorn, Fumio Furuta +13
The superconducting RF linac for LCLS-II calls for 1.3 GHz 9-cell cavities with an average intrinsic quality factor Q0 of 2.7x10^10 at 2 K and 16 MV/m accelerating gradient. Two ni…
Thermocurrents and their Role in high Q Cavity Performance
R. Eichhorn, C. Daly, F. Furuta +12
Over the past years it became evident that the quality factor of a superconducting cavity is not only determined by its surface preparation procedure, but is also influenced by the…
Photocathode Behavior During High Current Running in the Cornell ERL Photoinjector
Luca Cultrera, Jared Maxson, Ivan Bazarov +18
The Cornell University Energy Recovery Linac (ERL) photoinjector has recently demonstrated operation at 20 mA for approximately 8 hours, utilizing a multialkali photocathode deposi…