638 citations · 1.6k across the 43 of their papers we have counts for
31 papers · 1 filter
A Novel Approach for Fault Detection and Failure Analysis of CMOS Copper Metal Stacks
Gregor Hieronymus Eberwein, Gianluca Aglieri Rinella, Daniela Bortoletto +16
For the Inner Tracking System 3 (ITS3) upgrade, the ALICE experiment at CERN requires monolithic active pixel sensors of dimensions up to 97~mm266~mm, occupying a large…
Beam test studies for a SiPM-based RICH detector prototype for the future ALICE~3 experiment
A. R. Altamura, L. Congedo, G. De Robertis +14
The ALICE Collaboration is proposing a completely new apparatus, ALICE~3, for the LHC Runs~5 and beyond. In this context, a key subsystem for high-energy charged particle identific…
Test beam performance of a novel RICH detector with timing capabilities for the future ALICE~3 PID system at LHC
M. N. Mazziotta, L. Congedo, G. De Robertis +9
The ALICE Collaboration is proposing a completely new apparatus, ALICE 3, for the LHC Run 5 and beyond. A key subsystem for charged particle identification will be a Ring-Imaging C…
Development of a novel compact and fast SiPM-based RICH detector for the future ALICE 3 PID system at LHC
M. N. Mazziotta, A. R. Altamura, L. Congedo +12
A dedicated R\&D is ongoing for the charged particle identification system of the \mbox{ALICE 3} experiment proposed for the LHC Run 5 and beyond. One of the subsystems for the hig…
Influence of Radiation and AC Coupling on Time Performance of Analog Pixels Test Structures in 65 nm CMOS technology
Gianluca Aglieri Rinella, Luca Aglietta, Matias Antonelli +44
Monolithic Active Pixel Sensors (MAPS) in advanced CMOS imaging technologies are key to next-generation tracking systems for high-energy physics, where radiation hardness and preci…
Sensor operating point calibration and monitoring of the ALICE Inner Tracking System during LHC Run 3
D. Agguiaro, G. Aglieri Rinella, L. Aglietta +285
The new Inner Tracking System (ITS2) of the ALICE experiment began operation in 2021 with the start of LHC Run 3. Compared to its predecessor, ITS2 offers substantial improvements…
Characterisation of the first wafer-scale prototype for the ALICE ITS3 upgrade: the monolithic stitched sensor (MOSS)
Omar Abdelrahman, Gianluca Aglieri Rinella, Luca Aglietta +136
This paper presents the characterisation and testing of the first wafer-scale monolithic stitched sensor (MOSS) prototype developed for the ALICE ITS3 upgrade that is to be install…
Further Characterisation of Digital Pixel Test Structures Implemented in a 65 nm CMOS Process
Gianluca Aglieri Rinella, Nicole Apadula, Anton Andronic +55
The next generation of MAPS for future tracking detectors will have to meet stringent requirements placed on them. One such detector is the ALICE ITS3 that aims to be very light at…
Detection efficiency and spatial resolution of Monolithic Active Pixel Sensors bent to different radii
Anton Andronic, Pascal Becht, Mihail Bogdan Blidaru +37
Bent monolithic active pixel sensors are the basis for the planned fully cylindrical ultra low material budget tracking detector ITS3 of the ALICE experiment. This paper presents r…
Time performance of Analog Pixel Test Structures with in-chip operational amplifier implemented in 65 nm CMOS imaging process
Gianluca Aglieri Rinella, Luca Aglietta, Matias Antonelli +43
In the context of the CERN EP R&D on monolithic sensors and the ALICE ITS3 upgrade, the Tower Partners Semiconductor Co (TPSCo) 65 nm process has been qualified for use in high ene…
Characterisation of analogue Monolithic Active Pixel Sensor test structures implemented in a 65 nm CMOS imaging process
Gianluca Aglieri Rinella, Giacomo Alocco, Matias Antonelli +91
Analogue test structures were fabricated using the Tower Partners Semiconductor Co. CMOS 65 nm ISC process. The purpose was to characterise and qualify this process and to optimise…
A high-resolution pixel silicon Vertex Detector for open charm measurements with the \NASixtyOne spectrometer at the CERN SPS
A. Aduszkiewicz, M. Bajda, M. Baszczyk +24
The study of open charm meson production provides an efficient tool for the investigation of the properties of hot and dense matter formed in nucleus-nucleus collisions. The interp…
Digital Pixel Test Structures implemented in a 65 nm CMOS process
Gianluca Aglieri Rinella, Anton Andronic, Matias Antonelli +49
The ALICE ITS3 (Inner Tracking System 3) upgrade project and the CERN EP R&D on monolithic pixel sensors are investigating the feasibility of the Tower Partners Semiconductor Co. 6…
First demonstration of in-beam performance of bent Monolithic Active Pixel Sensors
ALICE ITS project, :, G. Aglieri Rinella +250
A novel approach for designing the next generation of vertex detectors foresees to employ wafer-scale sensors that can be bent to truly cylindrical geometries after thinning them t…
Supersensitive multipurpose/multifunctional avalanche gaseous detectors for environmental, hazard, intrusion systems (SMART)
Marcello Abbrescia, Giacinto De Cataldo, Antonio di Mauro +5
The aim of this work is to develop a prototype of integrated detector system to monitor environmental hazard: appearance of flames, smoke, sparks or dangerous gases (flammable, tox…
Charge collection properties of TowerJazz 180 nm CMOS Pixel Sensors in dependence of pixel geometries and bias parameters, studied using a dedicated test-vehicle: the Investigator chip
G. Aglieri Rinella, G. Chaosong, A. di Mauro +23
This paper contains a compilation of parameters influencing the charge collection process extracted from a comprehensive study of partially depleted Monolithic Active Pixel Sensors…
Systematic studies and optimization of super sensitivity gaseous detectors of sparks, open flames and smoke
Marcello Abbrescia, Giacinto De Cataldo, Antonio di Mauro +6
A review of the current progress in developments and tests of supersensitive gaseous detectors of open flame, sparks and smoke is given. A focus on the latest developments is on fl…
EUDAQ A Data Acquisition Software Framework for Common Beam Telescopes
P. Ahlburg, S. Arfaoui, J. -H. Arling +54
EUDAQ is a generic data acquisition software developed for use in conjunction with common beam telescopes at charged particle beam lines. Providing high-precision reference tracks…
A next-generation LHC heavy-ion experiment
D. Adamová, G. Aglieri Rinella, M. Agnello +395
The present document discusses plans for a compact, next-generation multi-purpose detector at the LHC as a follow-up to the present ALICE experiment. The aim is to build a nearly m…
Summary and Conclusions of the First DESY Test Beam User Workshop
Jan-Hendrik Arling, M. Sohail Amjad, Laura Bandiera +17
On October 5/6, 2017, DESY hosted the first DESY Test Beam User Workshop [1] which took place in Hamburg. Fifty participants from different user communities, ranging from LHC (ALIC…
Development of a new generation of micropattern gaseous detectors for high energy physics, astrophysics and environmental applications
V. Peskov, A. Di Mauroa, P. Fonte +5
We have developed a cost effective technology for manufacturing various layouts of micropattern gaseous detectors for a wide range of applications. Such devices feature resistive e…
Development and preliminary tests of resistive microdot and microstrip detectors
P. Fonte, E. Nappi, P. Martinengo +3
In the last few years our group have focused on developing various designs of spark-protected micropattern gaseous detectors featuring resistive electrodes instead of the tradition…
New designs of resistive microstrip gaseous detectors (R-MSGCs)
P. Martinengo, E. Nappi, R. Oliveira +3
A new family of spark-protected micropattern gaseous detectors is introduced: a 2-D sensitive restive microstrip counter and hybrid detectors, which combine in one design a resisti…
First observation of Cherenkov rings with a large area CsI-TGEM-based RICH prototype
V. Peskov, G. Bencze, A. Di Mauro +8
We have built a RICH detector prototype consisting of a liquid C6F14 radiator and six triple Thick Gaseous Electron Multipliers (TGEMs), each of them having an active area of 10x10…