13 citations · 58 across the 20 of their papers we have counts for
16 papers · 1 filter
Performance and long-term aging studies on Eco-Friendly Resistive Plate Chamber detectors
D. Ahmadi, M. Tytgat
Resistive Plate Chambers detectors are extensively used in several domains of Physics. In High Energy Physics, they are typically operated in avalanche mode with a high-performance…
Signal shape studies and rate dependence of HFO-based gas mixtures in RPC detectors
L. Quaglia, M. Abbrescia, G. Aielli +56
The RPCs employed at the LHC experiments are currently operated in avalanche mode, with a mixture containing a large fraction of CHF (90\% or more) with…
Technical design report for the CODEX- demonstrator
b collaboration, Giulio Aielli, Juliette Alimena +56
The CODEX- apparatus is a demonstrator for the proposed future CODEX-b experiment, a long-lived-particle detector foreseen for operation at IP8 during HL-LHC data-taking. The de…
Exploring Eco-Friendly Gas Mixtures for Resistive Plate Chambers: A Comprehensive Study on Performance and Aging
The RPC ECOGas@GIF++ collaboration, :, L. Quaglia +57
Resistive Plate Chambers (RPCs) are gaseous detectors widely used in high energy physics experiments, operating with a gas mixture primarily containing Tetrafluoroethane (CH$…
High-rate tests on Resistive Plate Chambers operated with eco-friendly gas mixtures
M. Abbrescia, G. Aielli, R. Aly +52
Results obtained by the RPC ECOgas@GIF++ Collaboration, using Resistive Plate Chambers operated with new, eco-friendly gas mixtures, based on Tetrafluoropropene and carbon dioxide,…
Preliminary results on the long term operation of RPCs with eco-friendly gas mixtures under irradiation at the CERN Gamma Irradiation Facility
L. Quaglia, D. Ramos, M. Abbrescia +55
Since 2019 a collaboration between researchers from various institutes and experiments (i.e. ATLAS, CMS, ALICE, LHCb/SHiP and the CERN EP-DT group), has been operating several RPCs…
Eco-friendly Resistive Plate Chambers for detectors in future HEP applications
Luca Quaglia
Resistive Plate Chamber detectors are largely used in current High Energy Physics experiments, typically operated in avalanche mode with large fractions of Tetrafluoroethane (C2H2F…
On a new environment-friendly gas mixture for Resistive Plate Chambers
G. Proto, B. Liberti, R. Santonico +9
This paper studies the performance of RPCs working with a new family of environment-friendly operating gases, mainly based on Carbon Dioxide and Hydro-Fluoro-Olefins. The tests are…
Performance of the BIS78 RPC detectors: a new concept of electronics and detector integration for high-rate and fast timing large size RPCs
Luca Pizzimento
The reduction of the average charge per count in the gas along with the capability to discriminate very small signals from noise can allow an efficient and long-term Resistive Plat…
Characterization of new eco friendly gas mixtures based on HFO for RPCs
G. Proto, G. Aielli, E. Alunno Camelia +11
The ATLAS RPC standard mixture, mainly based on CHF, has a high Global Warming Potential (GWP) and therefore the search for RPC eco friendly gases is mandatory. I…
Linearity and rate capability measurements of RPC with semi-insulating crystalline electrodes operating in avalanche mode
A. Rocchi, R. Cardarelli, B. Liberti +12
The intrinsic rate capability and the ageing properties of the Resistive Plate Chambers are closely related to the electrodes material and to the front-end electronics threshold. T…
RPC performance vs FE electoronics and detector parameters
R. Cardarelli, G. Aielli, E. Alunno Camelia +8
The first Resistive Plate Chambers detectors were developed for cosmic ray experiments, where low rate capability, good time resolution and low cost per unit of area were needed. T…
Development of gaseous particle detectors based on semiconductive plate electrodes
A. Rocchi, R. Cardarelli, G. Aielli +8
A new particle detector with sub-nanosecond time resolution capable of working in high-rate environment (rate capability of the order of ) is under developmnet. Semicond…
Design a TDC in SiGe for RPC's electronics Front-end for the use in a high-rate experiment
Salvatore Bruno, Roberto Cardarelli, Giulio Aielli +9
With the new generation of the RPC, it is possible to work with induced signals of hundreds , hence the front-end electronics is an important and delicate part of the detector…
Development of a new Front End electronics in Silicon and Silicon-Germanium technology for the Resistive Plate Chamber detector for high rate experiments
Luca Pizzimento, Roberto Cardarelli, Giulio Aielli +8
The upgrade of the Resistive Plate Chamber (RPC) detector, in order to increase the detector rate capability and to be able to work efficiently in high rate environment, consists i…
Optimization of RPCs read-out panel with electromagnetic simulation
E. Alunno Camelia, R. Cardarelli, A. Di Ciaccio +7
With the upgrade of the RPCs [1]-[2] and the increase of its performances, the study and the optimization of the read-out panel is necessary in order to maintain the signal integri…