activity
20002014
most citedPresent status and first results of the final focus beam line at the KEK Accelerator Test Facility

30 citations · 51 across the 14 of their papers we have counts for

collaborators

14 papers

physics.acc-ph2014

Wakefield effects of the bypass line in LCLS-II

K. Bane, T. Raubenheimer

In LCLS-II, after acceleration and compression and just before entering the undulator, the beam passes through 2.5 km of 24.5 mm (radius) stainless steel pipe. The bunch that passe…

physics.acc-ph2014★ 1 cited

Untrapped HOM Radiation Absorption in the LCLS-II Cryomodules

K. Bane, C. Nantista, C. Adolphsen +4

The superconducting cavities in the continuous wave (CW) linacs of LCLS-II are designed to operate at 2 K, where cooling costs are very expensive. One source of heat is presented b…

physics.acc-ph2012★ 30 cited

Present status and first results of the final focus beam line at the KEK Accelerator Test Facility

P. Bambade, M. Alabau Pons, J. Amann +91

ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF damping ring to a vertical size of about 37 nm and to demonstrate nanometer level beam…

physics.acc-ph2001

Dipole Wakefield Suppression In High Phase Advance Detuned Linear Accelerators For The JLC/NLC Designed To Minimise Electrical Breakdown And Cumulative BBU

R. M. Jones, N. M. Kroll, T. Higo +4

Recent experiments at SLAC [1,2] and CERN [3] have revealed evidence of significant deformation in the form of "pitting" of the cells of the 1.8m series of structures DDS/RDDS (Dam…

physics.acc-ph2001★ 9 cited

Feedback Systems for Linear Colliders

L. Hendrickson, P. Grossberg, T. Himel +6

Feedback systems are essential for stable operation of a linear collider, providing a cost-effective method for relaxing tight tolerances. In the Stanford Linear Collider (SLC), fe…

physics.acc-ph2001

The Next Linear Collider Extraction Line Design

Y. Nosochkov, T. O. Raubenheimer, K. Thompson +1

The two main functions of the NLC extraction line include: 1) transmission of the outgoing disrupted beam and secondary particles to the dump with minimal losses; and 2) beam diagn…