304 citations · 688 across the 15 of their papers we have counts for
5 papers · 1 filter
Mechanisms of Ti3Al precipitation in hcp alpha-Ti
Felicity F. Dear, Paraskevas Kontis, Baptiste Gault +3
Nucleation and growth of TiAl \textalpha{} ordered domains in \textalpha{}-Ti--Al--X alloys were characterised using a combination of transmission electron microscopy, atom…
A cracking oxygen story: a new view of stress corrosion cracking in titanium alloys
Sudha Joseph, Paraskevas Kontis, Yanhong Chang +4
Titanium alloys can suffer from halide-associated stress corrosion cracking at elevated temperatures e.g., in jet engines, where chlorides and Ti-oxide promote the cracking of wate…
On the coarsening mechanism and deformation of borides under annealing and creep in a polycrystalline superalloy
Lola Lilensten, Aleksander Kostka, Sylvie Lartigue-Korinek +4
We have investigated the coarsening mechanism of intergranular Cr-rich M2B borides after creep and annealing at 850C for approximately 3000 hours in a polycrystalline nickel-based…
Enhanced creep performance in a polycrystalline superalloy driven by atomic-scale phase transformation along planar faults
Lola Lilensten, Stoichko Antonov, Baptiste Gault +2
Predicting the mechanical failure of parts in service requires understanding their deformation behavior, and associated dynamic microstructural evolution up to the near-atomic scal…
Spinodal decomposition versus classical gamma-prime nucleation in a nickel-base superalloy powder: An in-situ neutron diffraction and atomic-scale analysis
David M Collins, Neil D'Souza, Chinnapat Panwisawas +4
Contemporary powder-based polycrystalline nickel-base superalloys inherit microstructures and properties that are heavily determined by the thermo-mechanical treatments during proc…