307 citations · 709 across the 18 of their papers we have counts for
7 papers · 1 filter
Effect of alloying and microstructure on formability of advanced high-strength steels processed via quenching and partitioning
P. Xia, F. Vercruysse, C. Celada-Casero +10
The article focuses on the effect of alloying and microstructure on formability of advanced high strength steels (AHSSs) processed via quenching and partitioning (Q&P). Three diffe…
Solid solution and precipitation strengthening effects in basal slip, extension twinning and pyramidal slip in Mg-Zn alloys
N. Li, C. Wang, M. A. Monclús +2
A high-throughput methodology is proposed, based on the combination of diffusion couples and advanced nanomechanical testing methods, to directly measure alloying effects on the cr…
Effect of Al content on the hardness and thermal stability study of AlTiN and AlTiBN coatings deposited by HiPIMS
A. Mendez, M. A. Monclus, J. A. Santiago +7
The microstructure, mechanical properties and thermal stability of AlTiN and AlTiBN coatings grown by reactive high-power impulse magnetron sputtering (HiPIMS) have been analyzed a…
High throughput optimization of hard and tough TiN/Ni nanocomposite coatings by reactive magnetron sputter deposition
Ignacio Lopez-Cabanas, Javier LLorca, Raquel Gonzalez-Arrabal +2
A combinatorial thin-film synthesis approach combined with a high throughput analysis methodology was successfully applied to synthesize TiN/Ni coatings with optimum mechanical pro…
A new physical simulation tool to predict the interface of dissimilar aluminum to steel welds performed by Friction Melt Bonding
T. Sapanathan, N. Jimenez-Mena, I. Sabirov +5
Optimization of the intermetallic layer thickness and the suppression of interfacial defects are key elements to improve the load bearing capacity of dissimilar joints. However, ti…
High temperature in situ SEM assessment followed by ex situ AFM and EBSD investigation of the nucleation and early growth stages of Fe-Al intermetallics
T. Sapanathan, I. Sabirov, P. Xia +4
A dedicated in situ heating setup in a scanning electron microscope (SEM) followed by an ex situ atomic force microscopy (AFM) and electron backscatter diffraction (EBSD) is used t…
High-throughput nanoindentation mapping of cast IN718 nickel-based superalloys: influence of the Nb concentration
Alberto Orozco-Caballero, Cristina Gutierrez, Bin Gan +1
A high-throughput correlative study of the local mechanical properties, chemical composition and crystallographic orientation has been carried out in selected areas of cast Inconel…