activity
20162026
most citedKAGRA: 2.5 Generation Interferometric Gravitational Wave Detector

535 citations · 943 across the 25 of their papers we have counts for

collaborators
Showing physics.ins-detShow all

10 papers · 1 filter

physics.ins-det2026

A Polarization-Decomposed Method for Simulating Inhomogeneous Birefringence in Laser-Interferometric Gravitational-Wave Detectors

Haoyu Wang, Yuta Michimura, Keiko Kokeyama +9

Birefringence in test mass substrates is an emerging limitation for current and future laser-interferometric gravitational-wave detectors, particularly as detectors move toward hig…

physics.ins-det2024

Optimizing Active Seismic Isolation Systems in Gravitational-Wave Detectors

Terrence Tsang, Fabián Erasmo Peña Arellano, Takafumi Ushiba +3

Gravitational wave detectors such as KAGRA, a 3-km long underground laser interferometer in Japan, require elaborate passive and active seismic isolation of their mirrors. With the…

physics.ins-det2022★ 7 cited

Estimation of Newtonian noise from KAGRA cooling system

Rishabh Bajpai, Takayuki Tomaru, Toshikazu Suzuki +3

KAGRA is the first km-scale gravitational wave detector to be constructed underground and employ cryogenics to cool down its test masses. While the underground location provides a…

physics.ins-det2022★ 8 cited

A laser interferometer accelerometer for vibration sensitive cryogenic experiments

Rishabh Bajpai, Takayuki Tomaru, Kazuhiro Yamamoto +5

Monitoring motion originating from ultra low-temperature cooling systems like cryocoolers is important for vibration sensitive cryogenic experiments like KAGRA. Since no commercial…

physics.ins-det2022★ 8 cited

Vibration Analysis of KAGRA Cryostat at Cryogenic Temperature

Rishabh Bajpai, Takayuki Tomaru, Nobuhiro Kimura +4

KAGRA uses cryogenics to cool its sapphire test masses down to 20 K to reduce the thermal noise. However, cryocooler vibration and structural resonances of the cryostat couple to t…

physics.ins-det2020★ 21 cited

Cryogenic suspension design for a kilometer-scale gravitational-wave detector

Takafumi Ushiba, Tomotada Akutsu, Yoichi Aso +43

We report the mirror suspension design for Large-scale Cryogenic Gravitational wave Telescope, KAGRA, during bKAGRA Phase 1. Mirror thermal noise is one of the fundamental noises f…

physics.ins-det2020★ 16 cited

High Performance Heat Conductor with Small Spring Constant for Cryogenic Applications

Tomohiro Yamada, Takayuki Tomaru, Toshikazu Suzuki +5

We developed a soft and high thermal conductive heat link for cryogenic applications. The measured maximum thermal conductivity was approximately 18500 W/m/K at 10 K. This spring c…

physics.ins-det2019★ 16 cited

An arm length stabilization system for KAGRA and future gravitational-wave detectors

T. Akutsu, M. Ando, K. Arai +198

Modern ground-based gravitational wave (GW) detectors require a complex interferometer configuration with multiple coupled optical cavities. Since achieving the resonances of the a…

physics.ins-det2019★ 14 cited

Vibration isolation system with a compact damping system for power recycling mirrors of KAGRA

Y. Akiyama, T. Akutsu, M. Ando +169

A vibration isolation system called Type-Bp system used for power recycling mirrors has been developed for KAGRA, the interferometric gravitational-wave observatory in Japan. A sus…

physics.ins-det2017★ 20 cited

Mirror actuation design for the interferometer control of the KAGRA gravitational wave telescope

Yuta Michimura, Tomofumi Shimoda, Takahiro Miyamoto +36

KAGRA is a 3-km cryogenic interferometric gravitational wave telescope located at an underground site in Japan. In order to achieve its target sensitivity, the relative positions o…