16 citations · 21 across the 4 of their papers we have counts for
5 papers
Solid solution and precipitation strengthening effects in basal slip, extension twinning and pyramidal slip in Mg-Zn alloys
N. Li, C. Wang, M. A. Monclús +2
A high-throughput methodology is proposed, based on the combination of diffusion couples and advanced nanomechanical testing methods, to directly measure alloying effects on the cr…
High temperature strength retention of Cu/Nb nanolaminates through dynamic strain ageing
Zhilin Liu, J. Snel, T. Boll +4
The mechanical properties of Cu/Nb metallic nanolaminates with different layer thickness (7, 16, 34 and 63 nm) were studied by means of micropillar compression tests from room temp…
High strain rate compression of epoxy micro pillars
Mario Rueda-Ruiz, Miguel A. Monclús, Ben D. Beake +2
The study of the high strain rate mechanical behaviour of materials using micropillar compression tests has been hindered so far due to the lack of suitable instrumentation. In the…
Effect of solute content and temperature on the deformation mechanisms and critical resolved shear stress in Mg-Al and Mg-Zn alloys
J-Y. Wang, N. Li, R. Alizadeh +4
The influence of solute atoms (Al and Zn) on the deformation mechanisms and the critical resolved shear stress for basal slip in Mg alloys at 298 K and 373 K was ascertained by mic…
Influence of temperature on the strain rate sensitivity and deformation mechanisms of nanotwinned Cu
L. W. Yang, C. Y. Wang, M. A. Monclús +3
The mechanical behavior of nanotwinned Cu was studied through indentation creep and constant strain rate indentation tests from 25 C to 200 C. The results showed an…