1 citations · 2 across the 4 of their papers we have counts for
5 papers
Nanomechanical characterization of the fracture toughness of Al/SiC nanolaminates
L. W. Yang, C. R. Mayer, N. Chawla +2
The fracture toughness of Al/SiC nanolaminates with different layer thicknesses (in the range 10 to 100 nm) was measured by means of micropillar splitting and bending of a notched…
High temperature strength retention of Cu/Nb nanolaminates through dynamic strain ageing
Zhilin Liu, J. Snel, T. Boll +4
The mechanical properties of Cu/Nb metallic nanolaminates with different layer thickness (7, 16, 34 and 63 nm) were studied by means of micropillar compression tests from room temp…
Effect of Al content on the critical resolved shear stress for twin nucleation and growth in Mg alloys
Jingya Wang, Jon M. Molina-Aldareguía, Javier LLorca
The effect of Al atoms in solid solution on the critical resolved shear stress for twin nucleation and growth was analyzed by means of the combination of diffusion couples with com…
Effect of solute content and temperature on the deformation mechanisms and critical resolved shear stress in Mg-Al and Mg-Zn alloys
J-Y. Wang, N. Li, R. Alizadeh +4
The influence of solute atoms (Al and Zn) on the deformation mechanisms and the critical resolved shear stress for basal slip in Mg alloys at 298 K and 373 K was ascertained by mic…
Influence of temperature on the strain rate sensitivity and deformation mechanisms of nanotwinned Cu
L. W. Yang, C. Y. Wang, M. A. Monclús +3
The mechanical behavior of nanotwinned Cu was studied through indentation creep and constant strain rate indentation tests from 25 C to 200 C. The results showed an…