570 citations · 4k across the 146 of their papers we have counts for
13 papers · 1 filter
Radiation damage study of Belle II silicon strip sensors with 90 MeV electron irradiation
K. Adamczyk, H. Aihara, K. Amos +58
The silicon strip sensors of the Belle II silicon vertex detector were irradiated with 90 MeV electron beams up to an equivalent 1-MeV-neutron fluence of $3.0\times 10^{13}~{\rm n}…
Operational experience and performance of the Silicon Vertex Detector after the first long shutdown of Belle II
K. Ravindran, K. Adamczyk, H. Aihara +62
In 2024, the Belle II experiment resumed data taking after the Long Shutdown 1, which was required to install a two-layer pixel detector and upgrade accelerator components. We desc…
Measurement of the cluster position resolution of the Belle II Silicon Vertex Detector
R. Leboucher, K. Adamczyk, L. Aggarwal +78
The Silicon Vertex Detector (SVD), with its four double-sided silicon strip sensor layers, is one of the two vertex sub-detectors of Belle II operating at SuperKEKB collider (KEK,…
The Design, Construction, Operation and Performance of the Belle II Silicon Vertex Detector
Francesco Forti
The Silicon Vertex Detector of Belle II is a state-of-the-art tracking and vertexing system based on double-sided silicon strip sensors, designed and fabricated by a large internat…
Direct measurements of the properties of Thick-GEM reflective photocathodes
G. Hamar, M. Baruzzo, C. Chatterjee +12
In the context of the development of novel Thick GEM based detectors of single photons, the high resolution optical system, nicknamed Leopard, providing a detailed surface scanning…
Construction and quality assurance of the Belle II Silicon Vertex Detector
P. K. Resmi
The Belle II experiment, which is situated at the interaction point of the SuperKEKB collider at KEK, Tsukuba, Japan, is expected to collect data corresponding to an int…
RHIP, a Radio-controlled High-Voltage Insulated Picoammeter and its usage in studying ion backflow in MPGD-based photon detectors
M. Bari, B. Gobbo, S. Dalla Torre +4
A picoammeter system has been developed and engineering. It consists in a current-voltage converter, based on an operational amplifier with very low input current, a high precision…
The high voltage system for the novel MPGD-based photon detectors of COMPASS RICH-1
J. Agarwala, R. Birsa, F. Bradamante +13
The architecture of the novel MPGD-based photon detectors of COMPASS RICH-1 consists in a large-size hybrid MPGD multilayer layout combining two layers of Thick-GEMs and a bulk res…
Status of COMPASS RICH-1 Upgrade with MPGD-based Photon Detectors
M. Alexeev, R Birsa, F. Bradamante +31
A Set of new MPGD-based Photon Detectors is being built for the upgrade of COMPASS RICH-1. The detectors cover a total active area of 1.4 m and are based on a hybrid architectu…
The COMPASS Setup for Physics with Hadron Beams
Ph. Abbon, C. Adolph, R. Akhunzyanov +228
The main characteristics of the COMPASS experimental setup for physics with hadron beams are described. This setup was designed to perform exclusive measurements of processes with…
Radiation hardness qualification of PbWO4 scintillation crystals for the CMS Electromagnetic Calorimeter
The CMS Electromagnetic Calorimeter Group, P. Adzic, N. Almeida +267
Ensuring the radiation hardness of PbWO4 crystals was one of the main priorities during the construction of the electromagnetic calorimeter of the CMS experiment at CERN. The produ…
The Fast Read-out System for the MAPMTs of COMPASS RICH-1
C. Schill
A fast readout system for the upgrade of the COMPASS RICH detector has been developed and successfully used for data taking in 2006 and 2007. The new readout system for the multi-a…
Fast Photon Detection for Particle Identification with COMPASS RICH-1
F. Nerling
Particle identification at high rates is an important challenge for many current and future high-energy physics experiments. The upgrade of the COMPASS RICH-1 detector requires a n…