activity
20192025
most citedLaser source for dimensional metrology: investigation of an iodine stabilized system based on narrow linewidth 633 nm DBR diode

14 citations · 37 across the 9 of their papers we have counts for

collaborators

9 papers

physics.optics2025

Monolithic interferometric modules for multi-axis coordinate positioning with sub-nanometre precision

Simon Rerucha, Ondrej Cip, Miroslava Hola +2

We report on developing, characterizing, and verifying a compact, monolithic laser interferometric assembly designed for high-precision two- and three-axis displacement measurement…

quant-ph2025

Country wide Shared FibreBased Infrastructure for Dissemination of Precise Time, Coherent Optical Frequency with Vibration Sensing

Josef Vojtech, Tomas Novak, Elisabeth Andriantsarazo +16

With the increasing demand for ultra-precise time synchronization and frequency dissemination across various scientific, industrial, and communication fields, the Czech Republic ha…

physics.ins-det2024★ 6 cited

Characterising and tackling thermally induced zero-drift in displacement measuring interferometry using temperature-controlled enclosure

Simon Rerucha, Miroslava Hola, Ondrej Cip +3

Our research efforts in displacement measurement interferometry focused on long-term drifts initiated an extended experimental investigation in the interferometric assemblies of ou…

physics.ins-det2022★ 2 cited

Tilt angle measurement with a Gaussian-shaped laser beam tracking

Martin Šarbort, Šimon Řeřucha, Petr Jedlička +2

We have addressed the challenge to carry out the angular tilt stabilization of a laser guiding mirror which is intended to route a laser beam with a high energy density. Such an ap…

physics.ins-det2022★ 7 cited

Automatic unit for measuring refractive index of air based on Ciddor equation and its verification using direct interferometric measurement method

V. Hucl, M. Cizek, J. Hrabina +11

In scanning probe microscopy laser interferometers are usually used for measuring the position of the probe tip with a metrological traceability. As the most of the AFM setups are…

physics.optics2022★ 5 cited

Absolute frequencies of H13C14N hydrogen cyanide transitions in 1,5 μm region with saturated spectroscopy and sub-kHz scanning laser

Jan Hrabina, Martin Hosek, Simon Rerucha +5

The wide span and high density of lines in its rovibrational spectrum render hydrogen cyanide a useful spectroscopic media for referencing absolute frequencies of lasers in optical…

physics.optics2019★ 2 cited

Investigating the use of the hydrogen cyanide (HCN) as an absorption media for laser spectroscopy

Martin Hosek, Simon Rerucha, Lenka Pravdova +4

The laser spectroscopy is a fundamental approach for the realisation of traceable optical frequency standards. In the m wavelength band, widely used in telecommunications,…

physics.optics2019★ 14 cited

Laser source for dimensional metrology: investigation of an iodine stabilized system based on narrow linewidth 633 nm DBR diode

Simon Rerucha, Andrew Yacoot, Tuan M Pham +4

We demonstrated that an iodine stabilized Distributed Bragg Reflector (DBR) diode based laser system lasing at a wavelength in close proximity to nm could be used as an a…

physics.ins-det2019★ 1 cited

Linearized and Compensated Interferometric System for High-Velocity Traceable Length Calibration on a Metre Scale

Simon Rerucha, Bretislav Mikel, Zdenek Matej +6

We report on a traceable calibration system for a 3500mm-long console that carries a measurement system for inspecting the diameter of a circular reactor chassis. The system uses t…