72 citations · 234 across the 23 of their papers we have counts for
10 papers · 1 filter
Uni-layer magnets: a new concept for LTS and HTS based superconducting magnets
José Luis Rudeiros Fernández, Paolo Ferracin
A novel geometrical configuration to form a magnetic field perpendicular to an aperture, created by an asymmetric current distribution, within a single layer, and using a continuou…
A Metallurgical Inspection Method to Assess the Damage in Performance-Limiting Nb3Sn Accelerator Magnet Coils
Alice Moros, Mickael Denis Crouvizier, Ignacio Aviles Santillana +12
The design and production of Nb3Sn-based dipole and quadrupole magnets is critical for the realization of the High-Luminosity Large Hadron Collider (HL-LHC) at the European Organiz…
Towards 20 T Hybrid Accelerator Dipole Magnets
P. Ferracin, G. Ambrosio, D. Arbelaez +13
The most effective way to achieve very high collision energies in a circular particle accelerator is to maximize the field strength of the main bending dipoles. In dipole magnets u…
Performance of a MQXF Nb3Sn Quadrupole Magnet Under Different Stress Level
Susana Izquierdo Bermudez, Giorgio Ambrosio, Bernardo Bordini +11
In a dipole or in a quadrupole accelerator magnet, the displacement of the coil turns induced by the electromagnetic forces can cause quenches limiting the magnet performance. For…
A Strategic Approach to Advance Magnet Technology for Next Generation Colliders
G. Ambrosio, K. Amm, M. Anerella +74
Colliders are built on a foundation of superconducting magnet technology that provides strong dipole magnets to maintain the beam orbit and strong focusing magnets to enable the ex…
REBCO -- a silver bullet for our next high-field magnet and collider budget?
Xiaorong Wang, Anis Ben Yahia, Ernesto Bosque +10
High-field superconducting magnets with a dipole field of 16 T and above enable future energy-frontier circular particle colliders. Although we believe these magnets can be built,…
Common Coil Dipole for High Field Magnet Design and R&D
Ramesh Gupta, Kathleen Amm, Julien Avronsart +22
The common coil geometry provides an alternate design to the conventional cosine theta dipoles. It allows a wider range of conductor and magnet technologies. It also facilitates a…
Fiber-optic diagnostic system for future accelerator magnets
Maria Baldini, Giorgio Ambrosio, Paolo Ferracin +6
The next generation high energy physics accelerators will require magnetic fields at ~20 T. HTS coils will be an essential component of future accelerator magnets and several effor…
MQXFA Final Design Report
Giorgio Ambrosio, Kathleen Amm, Mike Anerella +29
The MQXFA Quadrupole magnets will be installed in High Luminosity LHC to form the Q1 and Q3 inner triplet optical elements in front of the interaction points 1 (ATLAS) and 5 (CMS).…
Development and demonstration of next generation technology for Nb_3Sn accelerator magnets with lower cost, improved performance uniformity, and higher operating point in the 12-14 T range
Giorgio Ambrosio, Giorgio Apollinari, Vito Lombardo +7
The scope of the proposal outlined in this white paper is the development and demonstration of the technology needed for next generation of Nb_3Sn accelerator magnets in the 12-14…