115 citations · 163 across the 9 of their papers we have counts for
11 papers
Test results of the LQXFA/B02 and LQXFA/B03 cryo-assemblies for the High Luminosity LHC upgrade
G. Chlachidze, G. Ambrosio, M. Anerella +13
The US High-Luminosity LHC Accelerator Upgrade Project (AUP) is responsible for delivering cryo-assemblies for the Q1/Q3 quadrupole optical components of the High Luminosity LHC up…
First results of AUP Nb3Sn quadrupole horizontal tests
M. Baldini, G. Ambrosio, G. Apollinari +48
The Large Hadron Collider will soon undergo an upgrade to increase its luminosity by a factor of ~10 [1]. A crucial part of this upgrade will be replacement of the NbTi focusing ma…
Conceptual design of 20 T hybrid accelerator dipole magnets
P. Ferracin, G. Ambrosio, M. Anerella +17
Hybrid magnets are currently under consideration as an economically viable option towards 20 T dipole magnets for next generation of particle accelerators. In these magnets, High T…
Challenges and Lessons Learned from fabrication, testing and analysis of eight MQXFA Low Beta Quadrupole magnets for HL-LHC
G. Ambrosio, K. Amm, M. Anerella +55
By the end of October 2022, the US HL-LHC Accelerator Upgrade Project (AUP) had completed fabrication of ten MQXFA magnets and tested eight of them. The MQXFA magnets are the low b…
A Strategic Approach to Advance Magnet Technology for Next Generation Colliders
G. Ambrosio, K. Amm, M. Anerella +74
Colliders are built on a foundation of superconducting magnet technology that provides strong dipole magnets to maintain the beam orbit and strong focusing magnets to enable the ex…
Common Coil Dipole for High Field Magnet Design and R&D
Ramesh Gupta, Kathleen Amm, Julien Avronsart +22
The common coil geometry provides an alternate design to the conventional cosine theta dipoles. It allows a wider range of conductor and magnet technologies. It also facilitates a…
White Paper on Leading-Edge technology And Feasibility-directed (LEAF) Program aimed at readiness demonstration for Energy Frontier Circular Colliders by the next decade
G. Ambrosio, G. Apollinari, M. Baldini +39
In this White Paper for the Snowmass 2021 Process, we propose the establishment of a magnet Leading-Edge technology And Feasibility-directed Program (LEAF Program) to achieve readi…
MQXFA Final Design Report
Giorgio Ambrosio, Kathleen Amm, Mike Anerella +29
The MQXFA Quadrupole magnets will be installed in High Luminosity LHC to form the Q1 and Q3 inner triplet optical elements in front of the interaction points 1 (ATLAS) and 5 (CMS).…
Insertion Magnets
G. Ambrosio, M. Anerella, R. Bossert +34
Chapter 3 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Si…
Status of head-on beam-beam compensation in RHIC
W. Fischer, Z. Altinbas, M. Anerella +34
In polarized proton operation, the performance of the Relativistic Heavy Ion Collider (RHIC) is limited by the head-on beam-beam effect. To overcome this limitation, two electron l…
Measurements of the T2K neutrino beam properties using the INGRID on-axis near detector
K. Abe, N. Abgrall, Y. Ajima +428
Precise measurement of neutrino beam direction and intensity was achieved based on a new concept with modularized neutrino detectors. INGRID (Interactive Neutrino GRID) is an on-ax…