235 citations · 1.1k across the 31 of their papers we have counts for
12 papers · 1 filter
Performance of the front-end electronics of the CMS electromagnetic calorimeter barrel for the High-Luminosity LHC
The CMS Electromagnetic Calorimeter Group
The performance of the CMS electromagnetic calorimeter upgraded readout electronics, developed for the High-Luminosity phase of the LHC, is discussed. Data collected in two beam te…
Beam Test Performance Studies of CMS Phase-2 Outer Tracker Module Prototypes
The Tracker Group of the CMS Collaboration
A new tracking detector will be installed as part of the Phase-2 upgrade of the CMS detector for the high-luminosity LHC era. This tracking detector includes the Inner Tracker, equ…
CMS ECAL VFE design, production and testing
W. Lustermann, D. Abadjiev, G. Dissertori +4
Maintaining the required performance of the CMS electromagnetic calorimeter (ECAL) barrel at the High-Luminosity Large Hadron Collider (HL-LHC) requires the replacement of the enti…
Autoencoder-based Anomaly Detection System for Online Data Quality Monitoring of the CMS Electromagnetic Calorimeter
The CMS ECAL Collaboration
The CMS detector is a general-purpose apparatus that detects high-energy collisions produced at the LHC. Online Data Quality Monitoring of the CMS electromagnetic calorimeter is a…
Evaluation of Planar Silicon Pixel Sensors with the RD53A Readout Chip for the Phase-2 Upgrade of the CMS Inner Tracker
The Tracker Group of the CMS Collaboration
The Large Hadron Collider (LHC) at CERN will undergo an upgrade in order to increase its luminosity to cms. The increased luminosity during this…
Integration of thermo-electric coolers into the CMS MTD SiPM arrays for operation under high neutron fluence
A. Bornheim, W. Lustermann, K. Stachon +27
The barrel section of the novel MIP Timing Detector (MTD) will be constructed as part of the upgrade of the CMS experiment to provide a time resolution for single charged tracks in…
Test beam performance of a CBC3-based mini-module for the Phase-2 CMS Outer Tracker before and after neutron irradiation
The Tracker Group of the CMS Collaboration
The Large Hadron Collider (LHC) at CERN will undergo major upgrades to increase the instantaneous luminosity up to 5-7.5 cms. This High Luminosity upgr…
Test beam characterization of sensor prototypes for the CMS Barrel MIP Timing Detector
R. Abbott, A. Abreu, F. Addesa +196
The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event re…
Test Beam Performance Measurements for the Phase I Upgrade of the CMS Pixel Detector
M. Dragicevic, M. Friedl, J. Hrubec +481
A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detecto…
Performance of a Tungsten-Cerium Fluoride Sampling Calorimeter in High-Energy Electron Beam Tests
R. Becker, L. Bianchini, G. Dissertori +29
A prototype for a sampling calorimeter made out of cerium fluoride crystals interleaved with tungsten plates, and read out by wavelength-shifting fibres, has been exposed to beams…
Proof-of-principle of a new geometry for sampling calorimetry using inorganic scintillator plates
R. Becker, G. Dissertori, A. Gendotti +10
A novel geometry for a sampling calorimeter employing inorganic scintillators as an active medium is presented. To overcome the mechanical challenges of construction, an innovative…
Radiation hardness qualification of PbWO4 scintillation crystals for the CMS Electromagnetic Calorimeter
The CMS Electromagnetic Calorimeter Group, P. Adzic, N. Almeida +267
Ensuring the radiation hardness of PbWO4 crystals was one of the main priorities during the construction of the electromagnetic calorimeter of the CMS experiment at CERN. The produ…