57 citations · 290 across the 20 of their papers we have counts for
25 papers
Development for the Belle II vertex detector upgrade with depleted monolithic active pixel sensors
Y. Onuki, M. Babeluk, T. Bergauer +85
The vertex detector upgrade project for the Belle II experiment, based on CMOS depleted monolithic active pixel sensor technology, is planned to be carried out in conjunction with…
Application of exhaustive simulation flow for advanced performance prediction of monolithic active pixel sensors
E. Sacchetti, M. Babeluk, T. Bergauer +86
Monolithic active pixel sensor (MAPS) developments have pushed the detection performance in various directions, especially relative to timing where nanosecond-level precision is no…
The Belle II Detector Upgrades Framework Conceptual Design Report
H. Aihara, A. Aloisio, D. P. Auguste +207
We describe the planned near-term and potential longer-term upgrades of the Belle II detector at the SuperKEKB electron-positron collider operating at the KEK laboratory in Tsukuba…
Measurement of the fractional radiation length of a pixel module for the CMS Phase-2 upgrade via the multiple scattering of positrons
The Tracker Group of the CMS Collaboration
High-luminosity particle collider experiments such as the ones planned at the High-Luminosity Large Hadron Collider require ever-greater vertexing precision of the tracking detecto…
Beam Test Performance Studies of CMS Phase-2 Outer Tracker Module Prototypes
The Tracker Group of the CMS Collaboration
A new tracking detector will be installed as part of the Phase-2 upgrade of the CMS detector for the high-luminosity LHC era. This tracking detector includes the Inner Tracker, equ…
Silicon Vertex Detector of the Belle II Experiment
S. Mondal, K. Adamczyk, L. Aggarwal +72
The silicon vertex detector (SVD) is installed at the heart of the Belle II experiment, taking data at the high-luminosity -Factory SuperKEKB since 2019. The detector has shown…
Upgrade of Belle II Vertex Detector with CMOS Pixel Technology
M. Schwickardi, M. Babeluk, M. Barbero +27
The Belle II experiment at KEK in Japan considers upgrading its vertex detector system to address the challenges posed by high background levels caused by the increased luminosity…
Evaluation of Planar Silicon Pixel Sensors with the RD53A Readout Chip for the Phase-2 Upgrade of the CMS Inner Tracker
The Tracker Group of the CMS Collaboration
The Large Hadron Collider (LHC) at CERN will undergo an upgrade in order to increase its luminosity to cms. The increased luminosity during this…
The Silicon Vertex Detector of the Belle II Experiment
Laura Zani
Since the start of data taking in spring 2019 at the SuperKEKB collider (KEK, Japan) the Belle II Silicon Vertex Detector (SVD) has been operating reliably and with high efficiency…
Test beam performance of a CBC3-based mini-module for the Phase-2 CMS Outer Tracker before and after neutron irradiation
The Tracker Group of the CMS Collaboration
The Large Hadron Collider (LHC) at CERN will undergo major upgrades to increase the instantaneous luminosity up to 5-7.5 cms. This High Luminosity upgr…
The Design, Construction, Operation and Performance of the Belle II Silicon Vertex Detector
Francesco Forti
The Silicon Vertex Detector of Belle II is a state-of-the-art tracking and vertexing system based on double-sided silicon strip sensors, designed and fabricated by a large internat…
The Silicon Vertex Detector of the Belle II Experiment
G. Dujany, K. Adamczyk, L. Aggarwal +78
In 2019 the Belle II experiment started data taking at the asymmetric SuperKEKB collider (KEK, Japan) operating at the Y(4S) resonance. Belle II will search for new physics beyond…
Effects of temperature variations in high sensitivity Sagnac gyroscope
Andrea Basti, Nicolò Beverini, Filippo Bosi +11
GINGERINO is one of the most sensitive Sagnac laser-gyroscope based on an heterolithic mechanical structure. It is a prototype for GINGER, the laser gyroscopes array proposed to re…
An underground Sagnac gyroscope with sub-prad/s rotation rate sensitivity: toward General Relativity tests on Earth
Angela D. V. Di Virgilio, Filippo Bosi, Umberto Giacomelli +11
Measuring in a single location on Earth its angular rotation rate with respect to the celestial frame, with a sensitivity enabling access to the tiny Lense-Thirring effect is an ex…
Construction and quality assurance of the Belle II Silicon Vertex Detector
P. K. Resmi
The Belle II experiment, which is situated at the interaction point of the SuperKEKB collider at KEK, Tsukuba, Japan, is expected to collect data corresponding to an int…
Test Beam Performance Measurements for the Phase I Upgrade of the CMS Pixel Detector
M. Dragicevic, M. Friedl, J. Hrubec +481
A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detecto…
Deep underground rotation measurements: GINGERino ring laser gyroscope in Gran Sasso
Jacopo Belfi, Nicolo' Beverini, Filippo Bosi +11
GINGERino is a large frame laser gyroscope investigating the ground motion in the most inner part of the underground international laboratory of the Gran Sasso, in central Italy. I…
First Results of GINGERino, a deep underground ringlaser
J. Belfi, N. Beverini, F. Bosi +11
Large ring-laser gyroscopes are capable of measuring angular rotations with a precision well below fractions of , not far from , the accuracy required for…
Belle II Silicon Vertex Detector
Gagan B. Mohanty
The Belle II experiment at the SuperKEKB collider in Japan is designed to indirectly probe new physics using approximately 50 times the data recorded by its predecessor. An accurat…
Measuring the Virgo area tilt noise with a laser gyroscope
Jacopo Belfi, Nicolò Beverini, Filippo Bosi +4
We report on the measurements of tilt noise performed at the Virgo site with a ring laser gyroscope. The apparatus is a He-Ne laser operating in a square cavity mounted on a vertic…
A 1.82 m^2 ring laser gyroscope for nano-rotational motion sensing
Jacopo Belfi, Nicolò Beverini, Filippo Bosi +5
We present a fully active-controlled He-Ne ring laser gyroscope, operating in square cavity 1.35 m in side. The apparatus is designed to provide a very low mechanical and thermal d…
SuperB Progress Reports -- Detector
SuperB Collaboration, E. Grauges et al., Francesco Forti +2
This report describes the present status of the detector design for SuperB. It is one of four separate progress reports that, taken collectively, describe progress made on the Supe…
Performance studies of the CMS Strip Tracker before installation
CMS Tracker Collaboration
In March 2007 the assembly of the Silicon Strip Tracker was completed at the Tracker Integration Facility at CERN. Nearly 15% of the detector was instrumented using cables, fiber o…
A device to characterize optical fibres
F. Bosi, S. Burdin, V. Cavasinni +7
ATLAS is a general purpose experiment approved for the LHC collider at CERN. An important component of the detector is the central hadronic calorimeter; for its construction more t…