129 citations · 567 across the 47 of their papers we have counts for
10 papers · 2 filters
Precipitate strengthening of pyramidal slip in Mg-Zn alloys
Reza Alizadeh, Jingya Wang, Javier LLorca
The mechanical properties of Mg-4wt.% Zn alloy single crystals along the [0001] orientation were measured through micropillar compression at 23C and 100C. Basal slip was dominant i…
Microstructure, mechanical properties, corrosion resistance and cytocompatibility of WE43 Mg alloy scaffolds fabricated by laser powder bed fusion for biomedical applications
M. Li, F. Benn, T. Derra +6
Open-porous scaffolds of WE43 Mg alloy with a body-center cubic cell pattern were manufactured by laser powder bed fusion with different strut diameters. The geometry of the unit c…
Experimental and numerical analysis of cyclic deformation and fatigue behavior of a Mg-RE alloy
Meijuan Zhang, Hong Zhang, Anxin Ma +1
Strain-controlled fatigue of Mg-1Mn-0.5Nd (wt.\%) alloy were studied by experiment and simulation. The microstructure was made up of a dispersion of strongly texture grains (13\%)…
First principles analysis of precipitation in Mg-Zn alloys
S. Liu, G. Esteban-Manzanares, J. LLorca
Precipitation in Mg-Zn alloys was analyzed by means of first principles calculations. Formation energies of symmetrically distinct hcp Mg1-xZnx (0 < x < 1) configurations were dete…
High temperature strength retention of Cu/Nb nanolaminates through dynamic strain ageing
Zhilin Liu, J. Snel, T. Boll +4
The mechanical properties of Cu/Nb metallic nanolaminates with different layer thickness (7, 16, 34 and 63 nm) were studied by means of micropillar compression tests from room temp…
An analysis of the influence of the precipitate type on the mechanical behavior of Al-Cu alloys by means of micropillar compression tests
B. Bellón, S. Haouala, J. LLorca
The influence of different types of precipitates (either Guinier-Preston zones, or ) on the critical resolved shear stress and strain hardening was determined by means of…