Ablation of solids by femtosecond lasers: ablation mechanism and ablation thresholds for metals and dielectrics

Abstract

The mechanism of ablation of solids by intense femtosecond laser pulses is described in an explicit analytical form. It is shown that at high intensities when the ionization of the target material is complete before the end of the pulse, the ablation mechanism is the same for both metals and dielectrics. The physics of this new ablation regime involves ion acceleration in the electrostatic field caused by charge separation created by energetic electrons escaping from the target. The formulae for ablation thresholds and ablation rates for metals and dielectrics, combining the laser and target parameters, are derived and compared to experimental data. The calculated dependence of the ablation thresholds on the pulse duration is in agreement with the experimental data in a femtosecond range, and it is linked to the dependence for nanosecond pulses.

27 pages incl.3 figs; presented at CLEO-Europe'2000 11-15 Sept.2000; papers QMD6 and CTuK114

Cited by in corpus (29)

• Optical diagnostics of laser-produced plasmas
• Plasma Propulsion of a Metallic Micro-droplet and its Deformation upon Laser Impact
• Subwavelength modulational instability and plasmon oscillons in nanoparticle arrays
• Single-Shot Multi-Stage Damage and Ablation of Silicon by Femtosecond Mid-infrared Laser Pulses
• Gallium transformation under femtosecond laser excitation: Phase coexistence and incomplete melting
• Optimization of femtosecond laser processing in liquids
• Formation of periodic surface structures on dielectrics after irradiation with laser beams of spatially variant polarisation: a comparative study
• Concepts for direct frequency-comb spectroscopy of ${}^{229\text{m}}$Th and an internal-conversion-based solid-state nuclear clock
• Laser damage thresholds of ITER mirror materials and first results on in situ laser cleaning of stainless steel mirrors
• Broadband Terahertz Wave Emission from Liquid Metal
• Measurement of ultrashort laser ablation of four metals (Al, Cu, Ni, W) in single pulse regime
• Generation of High-Density High-Polarization Positrons via Single-Shot Strong Laser-Foil Interaction
• Femtosecond Self-Reconfiguration of Laser-Induced Plasma Patterns in Dielectrics
• Ultrafast energy absorption and photoexcitation of bulk plasmon in crystalline silicon subjected to intense near-infrared ultrashort laser pulses
• Femtosecond optical breakdown in silicon
• Unravelling ultrashort laser excitation of nickel at 800 nm wavelength
• Implementing a microphysics model in hydrodynamic simulations to study the initial plasma formation in dielectric ablator materials for direct-drive implosions
• Interaction of the ultra-short Bessel beam with transparent dielectrics: Evidence of high-energy concentration and multi-TPa pressure
• Single femtosecond laser pulse interaction with mica
• Influence of nonlinear- and saturable-absorption on laser lift-off threshold of oxide/metal structure
• Bremsstrahlung radiation from the interaction of short laser pulses with dielectrics
• Tuning High-Harmonic Generation by Controlled Deposition of Ultrathin Ionic Layers on Metal Surfaces
• Time-resolved optical emission spectroscopic studies of picosecond laser produced Cr plasma
• Numerical simulation of copper ablation by ultrashort laser pulses
• Real time reconstruction of the fast electron spectrum from high intensity laser plasma interaction using gamma counting technique
• Pushing the Frontiers of Light: Magnetized Plasma Lenses and Chirp Tailoring for Extreme Intensities
• Generation of Super Intense Isolated Attosecond Pulses from Trapped Electrons in Metal Surfaces
• On the Role of Atomic Binding Forces and Warm-Dense-Matter Physics in the Modeling of mJ-Class Laser-Induced Surface Ablation
• Terahertz emission from metal nanoparticles due to ultrafast heating