Adaptive thermal compensation of test masses in advanced LIGO
arXiv:gr-qc/0110011 · doi:10.1088/0264-9381/19/7/377
Abstract
As the first generation of laser interferometric gravitational wave detectors near operation, research and development has begun on increasing the instrument's sensitivity while utilizing the existing infrastructure. In the Laser Interferometer Gravitational Wave Observatory (LIGO), significant improvements are being planned for installation in ~2007, increasing strain sensitivity through improved suspensions and test mass substrates, active seismic isolation, and higher input laser power. Even with the highest quality optics available today, however, finite absorption of laser power within transmissive optics, coupled with the tremendous amount of optical power circulating in various parts of the interferometer, result in critical wavefront deformations which would cripple the performance of the instrument. Discussed is a method of active wavefront correction via direct thermal actuation on optical elements of the interferometer. A simple nichrome heating element suspended off the face of an affected optic will, through radiative heating, remove the gross axisymmetric part of the original thermal distortion. A scanning heating laser will then be used to remove any remaining non-axisymmetric wavefront distortion, generated by inhomogeneities in the substrate's absorption, thermal conductivity, etc. A proof-of-principle experiment has been constructed at MIT, selected data of which are presented.
arXiv comment11 pages, 7 figures, submitted to Classical and Quantum Gravity
Cited by in corpus (15)
- Open data from the first and second observing runs of Advanced LIGO and Advanced Virgo
- Gravitational Wave Detection by Interferometry (Ground and Space)
- Parametric instabilities and their control in advanced interferometer GW detectors
- DC-readout of a signal-recycled gravitational wave detector
- Overview of Advanced LIGO Adaptive Optics
- Compensation of Strong Thermal Lensing in High Optical Power Cavities
- Design study of an optical cavity for a future photon-collider at ILC
- Quantum limit for laser interferometric gravitational wave detectors from optical dissipation
- Using the etalon effect for in-situ balancing of the Advanced Virgo arm cavities
- Matrix Heater in the Gravitational Wave Observatory GEO 600
- Thermal Correction of Astigmatism in the Gravitational Wave Observatory GEO 600
- Mode matching error signals using radio-frequency beam shape modulation
- The optical loss study of molecular layer for a cryogenic interferometric gravitational-wave detector
- Analysis of a four-mirror cavity enhanced Michelson interferometer
- Design of adaptive optics by interference fitting: theoretical background