Fabrication and transport critical currents of multifilamentary MgB2/Fe wires and tapes
arXiv:cond-mat/0203114 · doi:10.1088/0953-2048/15/7/312
Abstract
Multifilamentary MgB2/Fe wires and tapes with high transport critical current densities have been fabricated using a straightforward powder-in-tube (PIT) process. After annealing, we measured transport jc values up to 1.1 * 105 A/cm2 at 4.2 K and in a field of 2 T in a MgB2/Fe square wire with 7 filaments fabricated by two-axial rolling, and up to 5 * 104 A/cm2 at 4.2 K in 1 T in a MgB2/Fe tape with 7 filaments. For higher currents these multifilamentary wires and tapes quenched due to insufficient thermal stability of filaments. Both the processing routes and deformation methods were found to be important factors for fabricating multifilamentary MgB2 wires and tapes with high transport jc values.
13 pages, 7 figures
References in corpus (10)
- Strongly linked current flow in polycrystalline forms of the new superconductor MgB2
- Thin Film Magnesium Boride Superconductor with Very High Critical Current Density and Enhanced Irreversibility Field
- Large transport critical currents in unsintered MgB2 superconducting tapes
- Superconducting Properties of MgB2 Bulk Materials Prepared by High Pressure Sintering
- Large transport critical currents in dense Fe- and Ni-clad MgB2 superconducting tapes
- High transport critical current density obtained for Powder-In-Tube-processed MgB2 tapes and wires using stainless steel and Cu-Ni tubes
- High transport critical current density above 30 K in pure Fe-clad MgB2 tape
- High transport currents in mechanically reinforced MgB2 wires
- Superconducting MgB(2) films via precursor post-processing approach
- Transport - and inductive critical current densities in superconducting MgB2
Cited by in corpus (5)
- Multifilamentary, in-situ Route, Cu-stabilized MgB2 Strands
- Transport and magnetic Jc of MgB2 strands and small helical coils
- Transport critical current densities and n factors in mono- and multifilamentary MgB2/Fe tapes and wires using fine powders
- Influence of the Preparation Process on Microstructure, Critical Current Density and Tc of MgB2 Powder-In-Tube Wires
- Mechanical properties of reinforced MgB2 wires