A millimeter-wave antireflection coating for cryogenic silicon lenses
arXiv:astro-ph/0701091 · doi:10.1364/AO.45.003746
Abstract
We have developed and tested an antireflection (AR) coating method for silicon lenses at cryogenic temperatures and millimeter wavelengths. Our particular application is a measurement of the cosmic microwave background. The coating consists of machined pieces of Cirlex glued to the silicon. The measured reflection from an AR coated flat piece is less than 1.5% at the design wavelength. The coating has been applied to flats and lenses and has survived multiple thermal cycles from 300 to 4 K. We present the manufacturing method, the material properties, the tests performed, and estimates of the loss that can be achieved in practical lenses.
Cited by in corpus (16)
- The Atacama Cosmology Telescope: The Receiver and Instrumentation
- The Atacama Cosmology Telescope: The polarization-sensitive ACTPol instrument
- ACTPol: A polarization-sensitive receiver for the Atacama Cosmology Telescope
- Optical Design of the Atacama Cosmology Telescope and the Millimeter Bolometric Array Camera
- Large-aperture wide-bandwidth antireflection-coated silicon lenses for millimeter wavelengths
- The Atacama Cosmology Telescope Project: A Progress Report
- Broadband Millimeter-Wave Anti-Reflection Coatings on Silicon Using Pyramidal Sub-Wavelength Structures
- Epoxy-based broadband anti-reflection coating for millimeter-wave optics
- A 1.6:1 Bandwidth Two-Layer Antireflection Structure for Silicon Matched to the 190-310 GHz Atmospheric Window
- Polypropylene Embedded Metal-Mesh Broadband Achromatic Half Wave Plate for Millimeter Wavelengths
- Deep Reactive Ion Etched Anti-Reflection Coatings for Sub-millimeter Silicon Optics
- Anti-reflection Coated Vacuum Window for the Primordial Inflation Polarization ExploreR (PIPER) balloon-borne instrument
- Flat low-loss silicon gradient index lens for millimeter and submillimeter wavelengths
- Demonstration of wideband metal mesh filters for submillimeter astrophysics using flexible printed circuits
- Dielectric Properties of Conductively Loaded Polyimides in the Far Infrared
- Millimeter Wave Absorber for Secure Identification