Laser induced broad band white emission from transparent Cr4+:YAG ceramics: Origin of broadband emission
arXiv:2609.30907 · doi:10.1016/j.jlumin.2021.117935
Abstract
Laser-induced white (light) emission was observed from transparent Cr:YAG ceramics irradiated with a focused continuous wave beam of light from an infrared laser diode. The laser-induced white emission is detected only on the surface of the sample and is not observed in volume. It is found that the intensity of the emission increases exponentially with the laser power density above the threshold. The impact of broadband emission on the power of the transmitted laser beam through the sample was measured. The disappearance of broadband emission due to displacement of the laser beam or an increase in ambient pressure leads to a decrease in the power of transmitted laser beam. Origins of the laser-induced white light emission along with its characteristic features are discussed in terms of multiphoton absorption, intervalence charge transfer and ionic space charge models.
References in corpus (3)
- Intervalence Charge Transfer Luminescence: Interplay between anomalous and 5d-4f emissions in Yb-doped fluorite-type crystals
- Influence of CaO and SiO2 additives on the sintering behavior of Cr,Ca:YAG ceramics prepared by solid-state reaction sintering
- Infrared laser stimulated broadband white emission of transparent Cr:YAG ceramics obtained by solid state reaction sintering
Cited by in corpus (4)
- Advancements and Challenges in Sintering Cr4+:YAG Ceramics: A Comprehensive Review on Transparent Ceramic Technology for Q-switched Lasers
- Spectroscopic properties of Cr,Yb:YAG nanocrystals under intense NIR radiation
- The influence of nonradiative relaxation on laser induced white emission properties in Cr:YAG nanopowders
- Surface-related white light emission phenomenon in transparent solids