SPARC: Sparse Path-Aware Residual Calibrator for Wireless Ray Tracing at Upper Mid-Band

Abstract

Accurate site-specific ray tracing (RT) is essential for upper mid-band network planning, yet raw RT can produce per-path multipath component (MPC) power errors on the order of 19--24~dB in cluttered indoor environments. A fixed-geometry material-sensitivity bound shows that a 30% relative-permittivity perturbation changes each surface interaction by at most 6.28~dB across the considered indoor materials. However, even MPCs with only one surface interaction exhibit a 19.2~dB mean RT--measurement bias, suggesting that missing clutter, displaced surfaces, and simplified 3D geometry dominate the per-path RT error. We propose SPARC (Sparse Path-Aware Residual Calibrator), a lightweight per-path calibration method that learns a sparse linear residual model from one completed RT simulation. SPARC uses standard RT features selected per fold by nested cross-validation, with ridge regularization and power-gated path matching; four features recur in both environments. Using measured indoor factory (InF) and indoor hotspot (InH) datasets at 6.75 and 16.95~GHz, SPARC reduces per-path power RMSE from 18.74 to 4.74~dB in InF and from 23.12 to 5.39~dB in InH. A jointly trained InF+InH model achieves 5.73~dB RMSE. When all links from one transmitter location are held out for testing, SPARC achieves 4.99~dB RMSE in InF and 5.85~dB RMSE in InH. SPARC therefore provides a practical post-processing calibration layer for site-specific per-path power prediction without ray-tracer modification or additional RT runs.

6 pages, 4 figures