Demonstration of simultaneous PIAA- coronagraphy and wavefront sensing using a single metasurface-based focal-plane optic

Abstract

Controlling residual wavefront aberrations downstream of an extreme adaptive optics (ExAO) system is a major challenge in high-contrast imaging. These aberrations produce quasi-static speckles due to differences between the wavefront-sensing and science paths. Highly sensitive wavefront sensors, such as Zernike wavefront sensors (ZWFSs), are used to mitigate these non-common path aberrations. High-performing coronagraphs, such as complex mask coronagraphs (CMCs), are also implemented in the focal plane. Both perform better with lossless apodization such as phase-induced amplitude apodization (PIAA) optics. Metasurfaces can have chromatic responses, allowing a single focal-plane optic to have different functionalities in different wavelength bands. We demonstrate such an optic by manufacturing a hybrid metasurface designed to function as a CMC and a ZWFS in two intermediate-band filters in the H band, each with a fractional bandwidth of approximately 1\%. We show measured optical responses with phases of $\sim \pi /2$ at shorter wavelengths and $\pi$ at longer wavelengths between $1500$ and $1700,\text{nm}$. This would allow for wavefront sensing at the shorter wavelength of $\sim 1500\text{nm}$ and coronagraphy at the longer wavelength of $\sim 1700\text{nm}$. Additionally, we tested the mask on-sky with the MagAO-X instrument at the Magellan Clay 6.5 m telescope at Las Campanas Observatory, Chile. On-sky results show a contrast of $\sim 10^{-1}$ at a non-ideal wavelength of $\sim 1600\text{nm}$. This is comparable to simulated contrast curves using the measured optical responses around that wavelength. Finally, we evaluated the wavefront-sensing performance of the metasurface using the MagAO-X internal source at $1300\mathrm{nm}$. The measured reconstruction error is consistent with simulations of an ideal Zernike wavefront sensor, confirming its wavefront-sensing functionality.