A Novel Open Phase Detection Method with Synchronized Phasors for Distribution Systems
arXiv:2608.22466
Abstract
An effective open phase detection is one of the unsolved challenges for utilities. Open phase detection is expected to detect the broken power line before it falls to the ground, to prevent the ignition of wildfires. The existing open phase detection methods are normally based on abnormal currents or voltages due to three phase unbalances after open phase events. For a complicated distribution feeder with multiple branches, current-based methods usually have a limited protection range, and voltage-based methods possibly failed due to the recreated voltage on the open phase due to back-feed. This paper presents a new open phase detection method based on the connection impedance of two measuring points, which is calculated with the synchronized phasors. Under an internal open phase condition, the calculated positive-sequence impedance is much larger than the impedance under other conditions, and its sign is negative. This new method is applicable for a distribution feeder with a closed-loop configuration, or DER units connected at the load side. It is almost not impacted by back-feed. This new method only requires point-to-point communication. This method can be easily implemented in the existing recloser controllers or RTUs. It is scalable, cost effective, and reliable.
10 pages