Frequency-Selective Pinching-Antenna Systems

Abstract

An uplink pinching-antenna system (PASS) is considered, where a segmented dielectric waveguide is employed to serve multiple users and one pinching antenna (PA) is activated on each segment. Extensive waveguide deployment reduces user-to-PA path loss but also creates differential propagation delays among the PA-assisted paths spanning the large waveguide aperture. These delays are retained, and a Toeplitz block model is derived to characterize the resulting frequency-selective (FS) channel. For infinite-blocklength transmission, the achievable single-user rate and the multiuser sum-rates under joint and parallel decoding are characterized. For carrier-phase-aligned single-user PA placement, the frequency-flat (FF) model is shown to overestimate the exact FS rate. The difference between the rates computed under the FF channel model and the exact FS channel model is referred to as the FF rate overestimation, and its dependence on the waveguide-aperture-induced delay spread is characterized. For small delay spreads, the FF rate overestimation is shown to increase approximately quadratically with the delay spread, whereas a derived lower bound reveals that the overestimation grows at least double logarithmically with the waveguide aperture, or equivalently with the delay spread, in the large-aperture regime. For finite-blocklength transmission, achievable rates are derived under a practical cyclic-prefix single-carrier frequency-domain equalization framework. An element-wise algorithm is developed to optimize FS-aware PA placement in both transmission regimes. The analytical findings demonstrate that differential delays across the extensively deployed waveguide can cause significant frequency selectivity and that the proposed FS-aware PA placement method substantially improves the achievable rate over placement based on the FF approximation, especially for large bandwidths and apertures.

34 pages