Using Muon Rings for the Calibration of the Cherenkov Telescope Array: An Analytical Solution for the Dual-Mirror Telescope Using Vector Geometry
arXiv:2607.14365 · doi:10.3847/1538-4365/ae6da5
Abstract
The analysis of ring images produced by muons in Imaging Atmospheric Cherenkov Telescopes (IACTs) provides a powerful and precise method for calibrating the optical throughput of the instrument and monitoring its optical point-spread function. To date, analytical solutions have been derived for single-mirror telescopes with reflectors assumed flat. However, a complete analytical description of the Cherenkov light produced by muons and detected by a dual-mirror telescope - accounting for both the secondary mirror and the camera - has remained elusive, owing to the complexity of the problem. In this work, we derive such a solution using a vector-geometry formalism supported by symbolic manipulation and Taylor expansions performed with the computer algebra system SageMath. We validate the formalism against known analytical solutions in simpler configurations and, for more complex terms, against limiting cases exhibiting the expected physical behavior. The behavior of the full solution is illustrated visually by varying the relevant parameters. The largest effects were found in the shadowing of Cherenkov light produced by inclined muons in dual-mirror telescopes, particularly for the Schwarzschild-Couder Telescope (SCT) design with baffles surrounding the secondary mirror. Deviations of up to 40% are observed relative to previously employed methods. As a by-product, we derive the first-order correction to the maximum emission height of Cherenkov photons emitted by a muon, arising from the curvature of the primary mirror - an effect neglected in previous studies - as well as the impact of coma aberration on the muon rings in single-mirror parabolic telescopes. Our results are directly applicable to muon-based calibration of the Cherenkov Telescope Array Observatory (CTAO).
This is the second article of the series "Using Muon Rings for the Calibration of the Cherenkov Telescope Array", following https://iopscience.iop.org/article/10.3847/1538-4365/ab2123
References in corpus (12)
- Design Concepts for the Cherenkov Telescope Array
- Monte Carlo design studies for the Cherenkov Telescope Array
- Wide field aplanatic two-mirror telescopes for ground-based gamma-ray astronomy
- Calibration and performance of the photon sensor response of FACT -- The First G-APD Cherenkov telescope
- Monte Carlo Performance Studies for the Site Selection of the Cherenkov Telescope Array
- First detection of the Crab Nebula at TeV energies with a Cherenkov telescope in a dual-mirror Schwarzschild-Couder configuration: the ASTRI-Horn telescope
- Using Muon Rings for the Calibration of the Cherenkov Telescope Array: A Systematic Review of the Method and its Potential Accuracy
- Design and Performance of the Prototype Schwarzschild-Couder Telescope Camera
- The Small-Sized Telescopes for the Southern Site of the Cherenkov Telescope Array
- Verification of the Optical System of the 9.7-m Prototype Schwarzschild-Couder Telescope
- CHEC: A Compact High Energy Camera for the Cherenkov Telescope Array
- The perfomance of generalized Davies-Cotton optical systems with infinitesimal mirror facets