Thermally accessible broadband soliton microcombs in silicon carbide enabled by dynamic polarization control

Abstract

Optical microcombs generated in high-Q microresonators are promising chip-scale light sources for applications ranging from optical communications to spectroscopy and metrology. However, thermo-optic instabilities remain a major obstacle to reliable soliton access. Self-cooling using auxiliary modes can stabilize the intracavity power, yet part of the power is continuously allocated to thermal compensation rather than comb generation, thereby limiting comb power and bandwidth. Here we propose a thermal compensation scheme based on dynamic polarization control. During soliton initiation, a fraction of the pump is coupled to an orthogonally polarized mode to provide self-cooling and ensure reliable soliton access. After soliton formation, polarization rotation and pump tuning transfer this cooling power to the comb-generating mode, enabling efficient single-soliton operation. Using this approach, we experimentally demonstrate a broadband 108-GHz-FSR single-soliton microcomb spanning over 450 nm, together with approximately 39% improvement in the 20-dB bandwidth and 60% increase in comb power relative to the static self-cooling configuration. This dynamic polarization-based thermal compensation enables efficient use of available laser power and provides a practical route to high-performance soliton microcombs in platforms with strong thermo-optic effects.

8 pages, 3 figures

References in corpus (26)

• Optical frequency comb generation from a monolithic microresonator
• Microresonator solitons for massively parallel coherent optical communications
• Microresonator Soliton Dual-Comb Spectroscopy
• Ultrafast optical ranging using microresonator soliton frequency combs
• Photonic chip based optical frequency comb using soliton induced Cherenkov radiation
• Coherent terabit communications with microresonator Kerr frequency combs
• Massively parallel coherent laser ranging using soliton microcombs
• Universal dynamics and controlled switching of dissipative Kerr solitons in optical microresonators
• Silicon-Chip Mid-Infrared Frequency Comb Generation
• Thermally Controlled Comb Generation and Soliton Modelocking in Microresonators
• Monolithic photonic circuits for Kerr frequency comb generation, filtering and modulation
• Integrated gallium phosphide nonlinear photonics
• Ultra-efficient frequency comb generation in AlGaAs-on-insulator microresonators
• AlGaAs-On-Insulator Nonlinear Photonics
• Stably accessing octave-spanning microresonator frequency combs in the soliton regime
• Octave-spanning dissipative Kerr soliton frequency combs in $S{i}_3{N}_4$ microresonators
• Thermo-Optical Chaos and Direct Soliton Generation in Microresonators
• μW-Level Microresonator Solitons with Extended Stability Range Using an Auxiliary Laser
• Bringing short-lived dissipative Kerr soliton states in microresonators into a steady state
• III-Nitride nanophotonics for beyond-octave soliton generation and self-referencing
• Directly accessing octave-spanning dissipative Kerr soliton frequency combs in an AlN microring resonator
• Microresonator soliton dual-comb imaging
• Soliton Microcombs in Integrated Chalcogenide Microresonators
• Dual-mode microresonators as straightforward access to octave-spanning dissipative Kerr solitons
• Thermal noise reduction in soliton microcombs via laser self-cooling
• Octave-spanning, deterministic single soliton generation in 4H-silicon carbide-on-insulator microring resonators