paper

An Embedded Mesh Approach for Isogeometric Boundary Layers in Contact Mechanics

arXiv:2603.01857 · doi:10.1016/j.cma.2026.119207

Abstract

This paper proposes a novel discretization workflow for contact problems in which the discretization of the contact interface is decoupled from that of the bulk domain. This separation enables independently tailored meshes for the contact interface and the bulk volume, allowing local requirements--such as element type and mesh resolution--to be addressed efficiently. Exploiting the boundary representation of CAD models, the contact interface of each body is discretized using a NURBS-based boundary layer mesh. This provides a smooth geometric description of the contact surface and enhanced inter-element continuity. The bulk domain is discretized using a structured Cartesian grid. To couple the resulting non-matching discretizations, an embedded mesh approach based on a mortar-type constraint formulation is employed. The paper describes in detail the proposed discretization workflow for generating both the isogeometric boundary layer and the structured Cartesian grid, and presents several strategies for constructing NURBS-based boundary layer meshes. Finally, a set of numerical examples is provided to validate the proposed approach.

arXiv commentIncluded some information after review: In Introduction: included a paragraph with more references. In Figure 13 (a) and (b): refined the stress scale to machine precision. In Subsection 4.5: A remark is included addressing issues with cut elements. Subsection 5.4: included a sensitivity analysis of the penalty paramenter to the Hertzian contact problem

References in corpus (5)