Triple Junctions as Dislocation-Like Defects: The Role of Grain Boundary Crystallography Revealed by Experiment and Atomistic Simulation
arXiv:2602.04530 · doi:10.1002/adem.71011
Abstract
Grain boundary networks and their evolution are strongly influenced by triple junctions. The defect nature of these line defects significantly affects the properties of the network, but they have not been fully characterized to date. Here, we use scanning transmission electron microscopy combined with atomistic computer simulations to investigate a triple junction at the atomic scale in an Al thin film with {111} texture. Using sampling methods, we were able to construct the same junction structure as in the experiment within a computer model. We present a technique to calculate the Burgers vector of the triple junction. This allows us to connect the junction's dislocation character to the microscopic degrees of freedom of the joining grain boundaries. The junction line energy in the computer model can then be calculated using an embedded atom method potential. It follows the same laws as a bulk dislocation. Finally, we discovered a range of possible triple junctions for the observed grain boundaries, which vary in the magnitude of their Burgers vector. Interestingly, the experimentally observed junction is not the one with the smallest possible Burgers vector and energy. This suggests that the kinetics of transforming the junction line are likely too slow to be driven by the small energy contribution of the triple junction.
13 pages, 9 figures
References in corpus (10)
- Structural phase transformations in metallic grain boundaries
- Grain-Boundary Kinetics: A Unified Approach
- Thermodynamics of coherent interfaces under mechanical stresses. I. Theory
- Dual phase patterning during a congruent grain boundary phase transition in elemental copper
- Universality of grain boundary phases in fcc metals: Case study on high-angle [111] symmetric tilt grain boundaries
- Dislocation content of grain boundary phase junctions and its relation to grain boundary excess properties
- Grand canonically optimized grain boundary phases in hexagonal close-packed titanium
- Relative Grain Boundary Energies from Triple Junction Geometry: Limitations to Assuming the Herring Condition in Nanocrystalline Thin Films
- Stable nanofacets in [111] tilt grain boundaries of face-centered cubic metals
- Faceting transition in aluminum as a grain boundary phase transition