paper

A Narrowband Fully-Analog Multi-Antenna Transmitter

arXiv:2602.03718 · doi:10.1109/ACCESS.2026.3702972

Abstract

This paper proposes a narrowband fully-analog -antenna transmitter that emulates the functionality of a narrowband fully-digital -antenna transmitter. Specifically, in symbol interval , the proposed fully-analog transmitter synthesizes an arbitrary complex excitation vector with prescribed total power from a single RF tone, using only tunable phase-control elements embedded in a passive interferometric programmable network. The programmable network is excited through one input port while the remaining input ports are impedance matched. In the ideal lossless case, the network transfer is unitary and therefore redistributes RF power among antenna ports without dissipative amplitude control. The synthesis task is posed as a unitary state-preparation problem: program a unitary family so that , where and . We provide a parameter-minimal realization and a closed-form programming rule: a balanced binary magnitude-splitting tree allocates the desired per-antenna magnitudes using tunable split ratios, and a per-antenna output phase bank assigns the target phases using tunable phase shifts. The resulting architecture uses exactly real tunable degrees of freedom and admits a deterministic programming procedure with no iterative optimization, enabling symbol-by-symbol updates. Using representative COTS components, we model the compute-excluded RF-front-end DC power of the proposed fully-analog transmitter and compare it against an equivalent COTS fully-digital array. For , the comparison indicates significant RF-front-end power savings for the fully-analog architecture under a common delivered antenna-port power normalization.

This paper is published in IEEE Access, see https://doi.org/10.1109/ACCESS.2026.3702972

A Narrowband Fully-Analog Multi-Antenna Transmitter · wovepaper