A Simulation Platform for Small Solar System Bodies' Gravity Using the Einstein-Elevator
arXiv:2511.11121 · doi:10.1063/5.0311668
Abstract
Small solar system bodies (SSSB), which in this study are defined primarily as asteroids and comets, are becoming increasingly important as more data have become available for their study. Their significance is also highlighted by missions like NASA's OSIRIS-REx or ESA's Rosetta. However, the study of the characteristics and behavior of these objects on Earth is a challenge as the simulation of their environmental conditions are difficult. We present in this paper an approach to enable the gravity simulation of SSSBs such as comets or asteroids in a drop tower facility on Earth, which is being addressed as part of the AKUS ("Activity of Comets under Partial Gravity") project. This especially concerns gravity levels between 10~\textit{g} and 10~\textit{g}, where the duration of the adjusted acceleration ranges from 2.5 to 3.2 seconds. In order to simulate the conditions of SSSB as accurately as possible, an acceleration system based on servo motors and spindle axes has been developed. The accelerations are transferred from the motors to the spindle axes containing a comet-like sample. The current dimensions of the total load (including sample, sample holder, data- and communication box) are 315~mm x 160~mm x 331~mm (w x d x h), with a total weight of approximately 15~kg. These are together placed inside a vacuum chamber providing a vacuum quality of 10~mbar. The whole setup is installed inside the Einstein-Elevator. Our results show that, with the current setup, we are able to generate conditions from 10~\textit{g} down to 10~\textit{g}. The maximum deviations under these conditions are ~\textit{g}.
This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Review of Scientific Instruments and may be found at: https://pubs.aip.org/aip/rsi/article/97/5/054503/3392619/A-simulation-platform-for-small-solar-system?utm_source=researchgate.net&utm_medium=article
References in corpus (16)
- OSIRIS-REx: Sample Return from Asteroid (101955) Bennu
- Successful Kinetic Impact into an Asteroid for Planetary Defense
- Momentum Transfer from the DART Mission Kinetic Impact on Asteroid Dimorphos
- Evidence for the formation of comet 67P/Churyumov-Gerasimenko through gravitational collapse of a bound clump of pebbles
- The Rosetta mission orbiter Science overview the comet phase
- The thermal, mechanical, structural, and dielectric properties of cometary nuclei after Rosetta
- The formation of the solar system
- Small Solar System Bodies as granular media
- Cometary Activity Begins at Kuiper Belt Distances: Evidence from C/2017 K2
- A novel facility for reduced-gravity testing: a set-up for studying low-velocity collisions into granular surfaces
- Experiments on cometary activity: ejection of dust aggregates from a sublimating water-ice surface
- Space Weathering of the 3-micron Phyllosilicate Feature induced by Pulsed Laser Irradiation
- Laboratory Impact Splash Experiments to Simulate Asteroid Surfaces
- TEMPus VoLA: the Timed Epstein Multi-pressure Vessel at Low Accelerations
- INTENTAS -- An entanglement-enhanced atomic sensor for microgravity
- Small Bodies of the Solar System Active at Large Heliocentric Distances: Studies with the 6-Meter Telescope of Sao Ras