Toward Safe and Energy-Efficient 5G NR V2X Communications in Rural Environments

Abstract

Connected braking can reduce fatal collisions in connected and autonomous vehicles (CAVs) by using reliable, low-latency 5G New Radio (NR) links, especially NR Sidelink Vehicle-to-Everything (V2X). In rural areas, road side units are sparse and power-constrained, so energy efficiency must be considered alongside safety. This paper studies how three communication control factors including subcarrier spacing ($\mathrm{SCS}$), modulation and coding scheme ($\mathrm{MCS}$), and transmit power ($P_{\mathrm{t}}$) should be configured to balance safety and energy consumption in rural scenarios in light and heavy traffic scenarios. Safety is quantified by the packet receive ratio ($\mathrm{PRR}$) against the minimum communication distance $D_{\mathrm{comm}}$, defined as the distance that the vehicle travels during the transmission of the safety message. Results show that, under heavy traffic, increasing $P_{\mathrm{t}}$ and selecting a low-rate $\mathrm{MCS}$ at $\mathrm{SCS}=30$ kHz sustains high $\mathrm{PRR}$ at $D_{\mathrm{comm}}$, albeit with higher energy cost. In light traffic, maintaining lower $P_{\mathrm{t}}$ with low $\mathrm{MCS}$ levels achieves a favorable reliability-energy trade-off while preserving acceptable $\mathrm{PRR}$ at $D_{\mathrm{comm}}$. These findings demonstrate the necessity of adaptive, energy-aware strategy to guarantee both safety and energy efficiency in rural V2X systems.

Accepted version