A Neutron Sensitive Detector Using 3D-Printed Scintillators

Abstract

This work reports on the performance of a novel neutron-sensitive scintillating detector fabricated using Fused-Deposition Modelling (FDM) additive manufacturing. FDM is a cost-effective 3D-printing method employing flexible plastic filaments to create custom-shaped components. Scintillating filaments, based on polystyrene doped with \emph{p}-terphenyl and 1,4-bis (5-phenyloxazol-2-yl) benzene, and enriched with ${}^6$LiF to enable neutron sensitivity were manufactured in house and achieved visible scintillation with a light output of 30$\pm$5~photons per MeV. Printed scintillators were then integrated into a detector system consisting of an image intensified TimePix3 camera, offering high spatial and temporal resolution. The detector performance was compared with Geant4 simulations of the scintillating sensor's response to electrons, gamma-rays, and thermal neutrons. A novel event discrimination algorithm, using the properties of the TimePix3 camera, enabled the separation of neutron signatures from the gamma-ray background.

14 pages, 8 figures. Submitted to Journal of Instrumentation

References in corpus (8)

• Measurement of the neutron flux at spallation sources using multi-foil activation
• Performance of a full scale prototype detector at the BR2 reactor for the SoLid experiment
• A novel polystyrene-based scintillator production process involving additive manufacturing
• Intensified Tpx3Cam, a fast data-driven optical camera with nanosecond timing resolution for single photon detection in quantum applications
• Additive manufacturing of fine-granularity optically-isolated plastic scintillator elements
• 3D Printing Neutron Detectors using Scintillating BN/ZnS Resin
• Measurement of cosmic muon-induced neutron background with ISMRAN detector in a non-reactor environment
• Feasibility study of a novel thermal neutron detection system using event mode camera and LYSO scintillation crystal