Parasitic loss in microring-waveguide coupling and its impact on wideband nonlinear photonics

Abstract

Microring resonators enable the enhancement of nonlinear frequency mixing processes, generating output fields at frequencies that widely differ from the inputs, in some cases by more than an octave. The efficiency of such devices depends on effective in- and out-coupling between access waveguides and the microrings at these widely separated frequencies. One successful approach is to separate the coupling task across multiple waveguides, with a cutoff waveguide (a waveguide that does not support guided modes above a certain wavelength) being judiciously used to prevent unwanted excessive overcoupling at low frequencies. Here, we examine how such a cutoff waveguide can still induce parasitic loss in the coupling region of a microring resonator, thereby impacting nonlinear device performance. We verified this parasitic loss channel through both experiment and simulation, showing that a waveguide optimized for 532 nm (visible) and 780 nm (near-infrared), while nominally cut off at 1550 nm, can still introduce significant parasitic loss at telecom wavelengths. This is studied in the context of visible-telecom optical parametric oscillation, where the excess parasitic loss can be strong enough to prevent threshold from being reached. Our finding elucidates a major challenge for wideband integrated nonlinear photonics processes when efficient coupling of widely-separated frequencies is needed.

References in corpus (13)

• Efficient and low-noise single-photon-level frequency conversion interfaces using silicon nanophotonics
• Chip-integrated visible-telecom photon pair sources for quantum communication
• Efficient photo-induced second harmonic generation in silicon photonics
• Visible light photonic integrated Brillouin laser
• Efficient telecom-to-visible spectral translation through ultra-low power nonlinear nanophotonics
• Broadband Resonator-Waveguide Coupling for Efficient Extraction of Octave Spanning Microcombs
• Ultra-Broadband Kerr Microcomb Through Soliton Spectral Translation
• Visible nonlinear photonics via high-order-mode dispersion engineering
• On-chip optical parametric oscillation into the visible: generating red, orange, yellow, and green from a near-infrared pump
• Visible blue-to-red 10 GHz frequency comb via on-chip triple-sum frequency generation
• Control of Second Harmonic Generation in Doubly Resonant Aluminum Nitride Microrings to Address Rubidium Two-Photon Clock Transition
• Efficient chip-based optical parametric oscillators from 590 nm to 1150 nm
• Broadband Visible Wavelength Microcomb Generation In Silicon Nitride Microrings Through Air-Clad Dispersion Engineering