A Comprehensive Computational Photovoltaic Study of Lead-free Inorganic NaSnCl${}_3$-based Perovskite Solar Cell: Effect of Charge Transport Layers and Material Parameters

Abstract

Lead-free all-inorganic halide perovskite solar cells (PSCs) have emerged as a promising alternative to toxic lead-based solar cells and organic solar cells, which have limited stability. This work explores such a PSC with sodium tin chloride (NaSnCl${}_3$) as the absorber, due to its significant potential for optoelectronic applications. To investigate this potential, a comprehensive computational analysis of NaSnCl${}_3$-based solar cells is performed using the one-dimensional solar cell capacitance simulator (SCAPS -1D). Simulations are performed for device structures with front contact/Indium Tin Oxide (ITO)/electron transport layer (ETL)/NaSnCl${}_3$/hole transport layer (HTL)/back contact configuration, where TiO${}_2$, SnS${}_2$, IGZO, ZnSe, CdS, GaSe, ZnSnN${}_2$, WS${}_2$, PCBM, STO, and CSTO are utilized as ETLs and CNTS, GO, Mg-CuCrO${}_2$, Spiro-OMeTAD, CdTe, GaAs, MoTe${}_2$, BaSi${}_2$, and P3HT are utilized as HTLs. Based on the obtained power conversion efficiency (PCE), six best ETL-HTL combinations with SnS${}_2$, STO, WS${}_2$, IGZO, ZnSe and CSTO as ETLs and MoTe${}_2$ as HTL are chosen for further analysis. The effects of different material and device parameters, such as thickness and doping density; effective density of states; bulk and interface defects; series and shunt resistance; and operating conditions, such as temperature and light intensity are investigated. Using the optimized material parameters, SnS${}_2$ ETL and MoTe${}_2$ HTL-based solar cell show the best performance with open circuit voltage, Voc = 1.196V, short circuit current density, Jsc = 35.82 mA/cm${}^2$, fill factor, FF = 89.72% and PCE = 38.42%. This detailed study provides valuable insights for the fabrication of high efficiency NaSnCl${}_3$-based solar cells.