Improving Optics Control and Measurement at RHIC

Abstract

Maximizing luminosity requires precise control of the optics function at the interaction point (IP), implying that the location ($s^{\ast }$) of the beta function's minimum value ($β^*$) must be moved to the collision location ($s_{IP}$) as much as possible. Accurate optics measurements and reliable control of $s^{\ast }$ in both planes are therefore essential for optimal collider performance. During Relativistic Heavy Ion Collider (RHIC) operations in 2024, measurements indicate an average horizontal beta beat of approximately $20\%$ at IP8, accompanied by measurement variation in measured $s^{\ast }$ in both planes. In this paper, a sensitivity-matrix-based optics correction scheme is demonstrated to effectively steer the optics toward desired targets using power supply currents of IR quadrupoles in the 8 o'clock interaction region (IR8). In addition, a method for measuring linear optics based on the one-turn map within the interaction regions is developed and systematically compared with established optics measurement methods used in RHIC operations. A comprehensive error analysis is performed for all measurement methods considered. Through these methods, a consistent reduction of $10\%$ beta beat is achieved by moving $s_x^{\ast }$ as well as a significant improvement in the reproducibility of $s^{\ast }$ measurements in both planes. The techniques demonstrated here will be further developed to support linear optics analysis and control of the future Electron-Ion Collider project.

14 pages, 9 figures