Membrane phononic crystals for high-Qm mechanical defect modes in piezoelectric aluminum nitride

Abstract

Nanomechanical resonators with exceptionally low dissipation are advancing mechanics-based sensors and quantum technologies. The key for these advances is the engineering of localized phononic modes that are well-isolated from the environment, i.e., that exhibit a high mechanical quality factor, Qm. Membrane phononic crystals fabricated from strained thin films can realize high-Qm single or multiple localized phononic defect modes at MHz frequencies. These defect modes can be efficiently interfaced with out-of-plane light or coupled to a microwave quantum circuit, enabling readout and control of their motion. When membrane phononic crystals are fabricated from a crystalline film, they could offer built-in functionality. We demonstrate a membrane phononic crystal realized in a strained 90 nm-thin film of aluminum nitride (AlN), which is a crystalline piezoelectric material. We engineer a high-Qm localized phononic defect mode at 1.8 MHz with a Qxf-product of 1.5x10^13 Hz at room temperature. In future devices, the built-in piezoelectricity of AlN can be utilized for direct coupling to qubits or in-situ tuning of mechanical mode frequencies, defect mode couplings, or acoustic bandgaps, which can be used as building blocks of tunable phononic circuits or low-noise sensors.

References in corpus (23)

• Optomechanical Crystals
• Quantum transduction of optical photons from a superconducting qubit
• Ultra-coherent nanomechanical resonators via soft clamping and dissipation dilution
• Efficient bidirectional piezo-optomechanical transduction between microwave and optical frequency
• Damping of Nanomechanical Resonators
• Minimization of phonon-tunneling dissipation in mechanical resonators
• A phononic bandgap shield for high-Q membrane microresonators
• Generalized dissipation dilution in strained mechanical resonators
• An integrated microwave-to-optics interface for scalable quantum computing
• Optomechanical ground-state cooling in a continuous and efficient electro-optic transducer
• Ground State Cooling of an Ultracoherent Electromechanical System
• Membrane-based scanning force microscopy
• Room-temperature quantum optomechanics using an ultra-low noise cavity
• Analysis of membrane phononic crystals with wide bandgaps and low-mass defects
• Harnessing Geometric Frustration to Form Band Gaps in Acoustic Channel Lattices
• Stress control of tensile-strained In${}_{1-x}$Ga${}_x$P nanomechanical string resonators
• Laser cooling a membrane-in-the-middle system close to the quantum ground state from room temperature
• Soft-clamped phononic dimers for mechanical sensing and transduction
• Tensile strained $I{n}_{x}G{a}_{1-x}P$ membranes for cavity optomechanics
• High-Q trampoline resonators from strained crystalline InGaP for integrated free-space optomechanics
• Nanomechanical crystalline AlN resonators with high quality factors for quantum optoelectromechanics
• Low-Dissipation Nanomechanical Devices from Monocrystalline Silicon Carbide
• Thickness dependence of the mechanical properties of piezoelectric high-$Q_m$ nanomechanical resonators made from aluminium nitride