Effects of isotherm patterns on cellular interface morphologies of melt pool origin
arXiv:2411.18638 · doi:10.1016/j.icheatmasstransfer.2024.108344
Abstract
Spatiotemporal variation of the thermal gradient in the melt pool inherited from different heat input patterns or other non-equilibrium transient effects during additive manufacturing can significantly affect the resulting subgrain microstructure evolution. To examine the impact of this variation, we approximate the thermal gradient by various isotherm patterns that move with constant velocity following directional solidification. We report the first three-dimensional phase-field simulations to investigate the effects of isotherm patterns on the cellular structures typically observed in solidified melt pools. Results indicate that small variations in the isotherm can considerably impact the microstructural features. We use appropriate statistical characterizations of the solid fraction, solid percolation, and solute partitioning behavior to demonstrate the influence of isotherm patterns on the dendritic structures and semisolid mushy zones. Consistent with experimental observations, we find that non-planar isotherms produce finer cells and reduced microsegregation compared to planar isotherms. Also, we note that a tilt of the isotherm leads to a tilted state of the resulting cellular arrays. Our findings will help in understanding the qualitative aspects of the influence of temperature gradient patterns on the evolution of solidification morphologies, mushy zones, and secondary phases, which are crucial for the macroscopic description of the solidified material.
References in corpus (13)
- Phase-Field Formulation for Quantitative Modeling of Alloy Solidification
- Quantitative Phase Field Model of Alloy Solidification
- Application of Finite Element, Phase-field, and CALPHAD-based Methods to Additive Manufacturing of Ni-based Superalloys
- Finite Interface Dissipation Phase Field Modeling of Ni-Nb under Additive Manufacturing Conditions
- On the primary spacing and microsegregation of cellular dendrites in laser deposited Ni-Nb alloys
- Single-Track Melt-Pool Measurements and Microstructures in Inconel 625
- Revealing the effects of laser beam shaping on melt pool behaviour in conduction-mode laser melting
- Simulation and analysis of -Ni cellular growth during laser powder deposition of Ni-based superalloys
- Strongly out-of-equilibrium columnar solidification during the Laser Powder-Bed Fusion additive manufacturing process
- Formation of Nb-rich droplets in laser deposited Ni-matrix microstructures
- Uncertainty Analysis of Microsegregation during Laser Powder Bed Fusion
- Simulation of temperature, stress and microstructure fields during laser deposition of Ti-6Al-4V
- Tusas: A fully implicit parallel approach for coupled phase-field equations