Generalized Bimode Equivalent Circuit of Arbitrary Planar Periodic Structures for Oblique Incidence

Abstract

This work presents, for the first time, a generalized bimode Fosters equivalent circuit for characterization of 2-D Planar Periodic Structures (PPSs) with arbitrary geometry at oblique incidence. It considers the interactions between the fundamental TE and TM modes without any restriction within the bimode bandwidth of the geometry. The proposed circuit is only composed of frequency-independent LC elements, which can be extracted systematically from electromagnetic (EM) simulations. The reactive immittances obtained in the process fulfill the Fosters theorem, enabling the design process of PPS-based devices using standardized synthesis techniques from circuit theory. To demonstrate its viability and general nature, equivalent circuits are extracted for different single- and multilayer PPS composed of rotated dipoles under oblique incidence theta=20 deg,phi=30 deg, and including dielectrics. Excellent agreement is found between the response of the circuit model and the EM simulation in all cases. Finally, to validate experimentally the proposed equivalent circuit and highlight its applicability, a 90 deg reflective LinearPolarization (LP) Rotator centered at 25 GHz and under oblique incidence, theta=30 deg, phi=0 deg (TE), is designed, manufactured, and tested. The agreement between the circuit response, the EM simulation and the measurement underlines the potential of the new equivalent circuit for PPS design under oblique incidence.

References in corpus (4)

• A Design Technique based on Equivalent Circuit and Coupler Theory for Broadband Linear to Circular Polarization Converters in Reflection or Transmission Mode
• A Simple Equivalent Circuit Approach for Anisotropic Frequency Selective Surfaces and Metasurfaces
• Exploring the Potentials of the Multi-modal Equivalent Circuit Approach for Stacks of 2-D Aperture Arrays
• Bimode Fosters Equivalent Circuit of Arbitrary Planar Periodic Structures and Its Application to Design Polarization Controller Devices