Preventing sinking of a disk by leveraging the boundary jump phenomenon

Abstract

Although it is commonly expected that a metal disk placed on the surface of water will sink, our investigation has revealed a surprising phenomenon: a vertical jet directed onto the disk from above can allow it to remain afloat. This result defies intuition, as one would assume that the force of the jet's impact would cause the disk to sink. We have discovered that this phenomenon occurs as a result of water displacement from the top of the disk caused by the impacting jet, operating through a mechanism similar to the hydraulic jump. This displacement increases the effective immersed volume, resulting in an increased buoyant force that balances gravity. In contrast to the classical case, here the jump radius is fixed by the geometric parameters of a disk, a phenomenon we refer to as the boundary jump. To further explore this effect, we have presented a theoretical model based on scaling laws, which provides the conditions required for the disk to float. The prefactor was determined through an independent experiment. Finally, we conducted experiments on the disk's floating and sinking, which showed a good match with the proposed theory.

References in corpus (5)

• On the origin of the hydraulic jump in a thin liquid film
• Constant Froude number in a circular hydraulic jump and its implication on the jump radius selection
• Surface tension and the origin of the circular hydraulic jump in a thin liquid film
• Surface Tension and Energy Conservation in a Moving Fluid
• Circular hydraulic jumps: where does surface tension matter?