Interferometric apodization by homothety -- II. Experimental validation

Abstract

This work presents the results of experimental laboratory tests on the apodization of circular and rectangular apertures using the Interferometric Apodization by Homothety (IAH) technique. The IAH approach involves splitting the amplitude of the instrumental PSF into two equal parts. One of the two produced PSFs undergoes a homothety to change its transverse dimensions while its amplitude is properly controlled. The two PSFs are then combined to produce an apodized image. The diffraction wings of the resulting PSF are subsequently reduced by some variable reduction factor, depending on an amplitude parameter $\gamma$ and a spread parameter $\eta$. This apodization approach was implemented in the laboratory using an interferometric setup based on the Mach-Zehnder Interferometer (MZI). The experimental results exhibit a strong agreement between theory and experiment. For instance, the average experimental contrast obtained at a low angular separation of $2.4\lambda /D$ does not exceed $5\times 10^{-4}$. This work also allowed us to study the influence on the apodizer's performance of some parameters such as the wavelength and the density of the neutral filters.

11 pages, 12 figures, Article

References in corpus (7)

• The Habitable Exoplanet Observatory (HabEx) Mission Concept Study Final Report
• The LUVOIR Mission Concept Study Final Report
• Apodized phase mask coronagraphs for arbitrary apertures. II. Comprehensive review of solutions for the vortex coronagraph
• Analytical tolerancing of segmented telescope co-phasing for exo-Earth high-contrast imaging
• A Coronagraph with a Sub-$\lambda /D$ IWA and a Moderate Spectral Bandwidth
• Predicting contrast sensitivity to segmented aperture misalignment modes for the HiCAT testbed
• Interferometric apodization by homothety -- I. Optimization of the device parameters