paper

Time-Relative RTK-GNSS: GNSS Loop Closure in Pose Graph Optimization

arXiv:2312.02448 · doi:10.1109/LRA.2020.3003861

Abstract

A pose-graph-based optimization technique is widely used to estimate robot poses using various sensor measurements from devices such as laser scanners and cameras. The global navigation satellite system (GNSS) has recently been used to estimate the absolute 3D position of outdoor mobile robots. However, since the accuracy of GNSS single-point positioning is only a few meters, the GNSS is not used for the loop closure of a pose graph. The main purpose of this study is to generate a loop closure of a pose graph using a time-relative real-time kinematic GNSS (TR-RTK-GNSS) technique. The proposed TR-RTK-GNSS technique uses time-differential carrier phase positioning, which is based on carrier-phase-based differential GNSS with a single GNSS receiver. Unlike a conventional RTK-GNSS, we can directly compute the robot's relative position using only a stand-alone GNSS receiver. The initial pose graph is generated from the accumulated velocity computed from GNSS Doppler measurements. To reduce the accumulated error of velocity, we use the TR-RTK-GNSS technique for the loop closure in the graph-based optimization framework. The kinematic positioning tests were performed using an unmanned aerial vehicle to confirm the effectiveness of the proposed technique. From the tests, we can estimate the vehicle's trajectory with approximately 3 cm accuracy using only a stand-alone GNSS receiver.

arXiv commentPublished in IEEE Robotics and Automation Letters (RA-L) and presented at the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), 2020

Cited by in corpus (5)