Dense and single-phase KTaO${}_3$ ceramics obtained by spark plasma sintering

Abstract

Potassium tantalate (KTaO${}_3$) is a promising material for dielectric applications at low temperature. However, dense and single-phase ceramics cannot be obtained by conventional sintering because of the evaporation of potassium that leads to secondary phases. Here, we demonstrate that spark plasma sintering is a suitable method to obtain dense and single-phase KTaO${}_3$ ceramics, by optimizing three parameters: initial composition, temperature, and pressure. A 2 mol% K-excess in the precursors leads to a large grain growth and dense single-phase ceramics. Without K-excess, a small amount of secondary phase (K${}_6$Ta${}_{10.8}$O${}_{30}$) is observed at the surface but can be removed by polishing. At 10 K, the dielectric permittivity is 4 times higher in the ceramic from the 2 mol% K-excess powder, because of the larger grain size. The thermal conductivity decreases with decreasing grain size and stays above the thermal conductivity of KNbO${}_3$ ceramics.

to be published in Journal of the European Ceramic Society