Exploiting synchrotron X-ray tomography for a novel insight into flax-fibre defects ultrastructure

Abstract

Flax fibres are valuable reinforcements for tomorrow's composites. However, defects called kink-bands, which mainly appear on fibres during the extraction and transformation phases, might affect their mechanical properties. Defects induced pores, within the kink-band are investigated in this work. They were morphologically explored using synchrotron phase-contrast X-ray microtomography, a technique that displays a sharp 3D representation of the pores. The study highlights the link between kink-bands and secondary cell wall ultrastructure. Pores are organised concentrically around the lumen, and their low thickness suggest that they are located at the interface between cellulose layers within S2 (G) layer. Moreover, the pores inclination with reference to the lumen axis follows the typical microfibrillar angle changes observed in the literature in the kink-band region. The volumes of the pores were measured, and a local increase in porosity was revealed in zones where defects are most severe along the fibre.

arXiv comment12 pages, 6 figures. Accepted for publication in Industrial Crops and Products (ISSN 0926-6690)

References in corpus (3)

• PyHST2: an hybrid distributed code for high speed tomographic reconstruction with iterative reconstruction and a priori knowledge capabilities
• Elucidating the formation of structural defects in flax fibres through synchrotron X-ray phase-contrast microtomography
• Current Status of Hard X-Ray Nano-Tomography on the Transmission Microscope at the ANATOMIX Beamline