A diffuse scattering model of ultracold neutrons on wavy surfaces

Abstract

Metal tubes plated with nickel-phosphorus are used in many fundamental physics experiments using ultracold neutrons (UCN) because of their ease of fabrication. These tubes are usually polished to a average roughness of 25-150 nm. However, there is no scattering model that accurately describes UCN scattering on such a rough guide surface with a mean-square roughness larger than 5 nm. We therefore developed a scattering model for UCN in which scattering from random surface waviness with a size larger than the UCN wavelength is described by a microfacet Bidirectional Reflectance Distribution Function model (mf-BRDF model), and scattering from smaller structures by the Lambert's cosine law (Lambert model). For the surface waviness, we used the statistical distribution of surface slope measured by an atomic force microscope on a sample piece of guide tube as input of the model. This model was used to describe UCN transmission experiments conducted at the pulsed UCN source at J-PARC. In these experiments, a UCN beam collimated to a divergence angle smaller than $\pm 6^{\circ }$ was directed into a guide tube with a mean-square roughness of 6.4 nm to 17 nm at an oblique angle, and the UCN transport performance and its time-of-flight distribution were measured while changing the angle of incidence. The mf-BRDF model combined with the Lambert model with scattering probability $p_L=0.039\pm 0.003$ reproduced the experimental results well. We have thus established a procedure to evaluate the characteristics of UCN guide tubes with a surface roughness of approximately 10 nm.

arXiv comment15 pages, 11 figures. Accepted for publication in PRC

References in corpus (15)

• Measurement of the permanent electric dipole moment of the neutron
• Quantitative characterization of surface topography using spectral analysis
• A Revised Experimental Upper Limit on the Electric Dipole Moment of the Neutron
• Neutron lifetime measurements with the big gravitational trap for ultracold neutrons
• Apparatus for Measurement of the Electric Dipole Moment of the Neutron using a Cohabiting Atomic-Mercury Magnetometer
• First ultracold neutrons produced at TRIUMF
• Neutron optics of the PSI ultracold neutron source: characterization and simulation
• Optimizing neutron moderators for a spallation-driven ultracold-neutron source at TRIUMF
• Pulsed UCN production using a Doppler shifter at J-PARC
• A prestorage method to measure neutron transmission of ultracold neutron guides
• Evaluation of commercial nickel-phosphorus coating for ultracold neutron guides using a pinhole bottling method
• Proof of Principle for Ramsey-type Gravity Resonance Spectroscopy with qBounce
• Ultracold neutron storage and transport at the PSI UCN source
• Characterization of electroless nickel-phosphorus plating for ultracold-neutron storage
• Estimated performance of the TRIUMF ultracold neutron source and electric dipole moment apparatus

Cited by in corpus (1)

• Polarized cold-neutron reflectometry at JRR-3/MINE2 for the development of ultracold-neutron spin analyzers for a neutron EDM experiment at TRIUMF