Development of a prototype superconducting radio-frequency cavity for conduction-cooled accelerators

Abstract

The higher efficiency of superconducting radio-frequency (SRF) cavities compared to normal-conducting ones enables the development of high-energy continuous-wave linear accelerators (linacs). Recent progress in the development of high-quality Nb${}_3$Sn film coatings along with the availability of cryocoolers with high cooling capacity at 4 K makes it feasible to operate SRF cavities cooled by thermal conduction at relevant accelerating gradients for use in accelerators. A possible use of conduction-cooled SRF linacs is for environmental applications, requiring electron beams with energy of $1-10$ MeV and 1 MW of power. We have designed a 915 MHz SRF linac for such an application and developed a prototype single-cell cavity to prove the proposed design by operating it with cryocoolers at the accelerating gradient required for 1 MeV energy gain. The cavity has a $\sim 3$ $\mu$m thick Nb${}_3$Sn film on the inner surface, deposited on a $\sim 4$ mm thick bulk Nb substrate and a bulk $\sim 7$ mm thick Cu outer shell with three Cu attachment tabs. The cavity was tested up to a peak surface magnetic field of 53 mT in liquid He at 4.3 K. A horizontal test cryostat was designed and built to test the cavity cooled with three Gifford-McMahon cryocoolers. The rf tests of the conduction-cooled cavity, performed at General Atomics, achieved a peak surface magnetic field of 50 mT and stable operation was possible with up to 18.5 W of rf heat load. The peak frequency shift due to microphonics was 23 Hz. These results represent the highest peak surface magnetic field achieved in a conduction-cooled SRF cavity to date and meet the requirements for a 1 MeV energy gain.

References in corpus (17)

• A Review of the Properties of Nb3Sn and Their Variation with A15 Composition, Morphology and Strain State
• Grain-boundary structure and segregation in Nb3Sn coatings on Nb for high-performance superconducting radiofrequency cavity applications
• Resolving thermoelectric paradox in superconductors
• Atomic scale analysis of Nb3Sn on Nb prepared by a vapor-diffusion process for superconducting radiofrequency cavity applications
• Design of a cw, low energy, high power superconducting linac for environmental applications
• Strain sensitivity and superconducting properties of Nb3Sn from first principles calculations
• Performance-defining properties of Nb${}_3$Sn coating in SRF cavities
• First demonstration of a cryocooler conduction cooled superconducting radiofrequency cavity operating at practical cw accelerating gradients
• Multi-metallic conduction cooled superconducting radio-frequency cavity with high thermal stability
• Dynamic transition of vortices into phase slips and generation of vortex-antivortex pairs in thin film Josephson junctions under dc and ac currents
• High-power magnetron transmitter as an RF source for superconducting linear accelerators
• Nb3Sn multicell cavity coating system at JLAB
• Analysis of RF losses and material characterization of samples removed from a Nb3Sn-coated superconducting RF cavity
• Modeling and Experiments of an Injection-Locked Magnetron With Various Load Reflection Levels
• Impact of geometry on the magnetic flux trapping of superconducting accelerating cavities
• Phase and Power Control in the RF Magnetron Power Stations of Superconducting Accelerators
• Resonant interaction of the electron beam with a synchronous wave in controlled magnetrons for high-current superconducting accelerators

Cited by in corpus (1)

• Development of a Prototype Superconducting Radio-Frequency Multicell Cavity for Compact, Conduction-Cooled Accelerators