Study on U/Th residual radioactivity in acrylic from surface treatment

Abstract

Acrylic is widely used as material for the target container in low background experiments due to its high light transparency and low intrinsic radioactivity. However, its surface can be easily contaminated during production, so careful treatment of the surface is essential to avoid direct contamination of the target. The Jiangmen Underground Neutrino Observatory will use about 600~t of acrylic to build the spherical vessel of 35.4~m in diameter for a 20~kt liquid scintillator (LS). Since acrylic will contact the LS directly, the cleanliness of the its surface is quite important for the radiopurity of the LS. A new method for measuring the radioactivity of ${}^{238}$U and ${}^{232}$Th in acrylic to sub-ppt ($<10^{-12}$~g/g) was developed, and it is crucial for the acrylic radioactivity screening in this study. We performed many background tests on different surface treatments, and the recommended procedure for the treatment of acrylic to achieve low radioactivity and high light transparency could be applicable to other low background experiments.

References in corpus (6)

• The SNO+ Experiment
• Improved measurement of solar neutrinos from the Carbon-Nitrogen-Oxygen cycle by Borexino and its implications for the Standard Solar Model
• Radioactivity control strategy for the JUNO detector
• Material Screening with HPGe Counting Station for PandaX Experiment
• Simulation of background reduction and Compton depression in low-background HPGe spectrometer at a surface laboratory
• A practical approach of high precision U and Th concentration measurement in acrylic